Automatic power trunk lid




So while I wait for my ecu I decided to buy all the parts to retrofit automatic power trunk lid. Below is the parts I needed to do this. My only question is that I need to know is what else I need to do to make it work. I know coding has to be done. If anyone did this retrofit please let me know the steps you took to make this work.
a2218706387 lid module
a2208217251 lid button
a2218001548 hydraulic pump motor
a2215406110 wiring harness
a2215409213 wiring harness








mine doesn't have it and I open and close it like a grown up 10 times faster
plus with the horrific design of 1/4 of a pint of rain water goes in the boot each side every time you open if there been rain or it is raining - I much prefer the option to wipe most off before it goes in and hold it mostly closed as I catch it in my hand on the amp side




However, I use the door button and trunk buttons for the lid feature all the time.
At the risk of sounding eleitist, (I am not, I drive old cars and maintain them myself), I use Open while in the car, so that Golf attendant can fetch my clubs before the round. Also, I pre-order our groceries, simply pull into the pickup spot, hit the button and in go the groceries, all while I enjoy the A/C out of the heat. I use the trunk lid Lock button if I walk away after retrieving something. So its what you get used to, I guess.
OP, enjoy the new features and keep us posted!
both my 221 and my fathers 211 come as std with an over the top spring release - using the key or with the button I never use inside, the boot pings up to fully open with gusto - as in 1/4 of a second, not a sticky clunky 8 seconds or so for the auto open and again close feature
as this encourages the snap the designed to fracture loom for the camera, license plate illumination, and central locking... I do not have the springs in the std fly open and snap the wire tension Merc configure the car with - on my 221 I can get perfect pop and sit closed - yet open and stay open feature I want
whereas his 211 is stupid, the hinge loves to fall on you if you set the spring tension so it stays closed but not latched like I have on mine




