Issue with wheel/tire size
#1
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
Issue with wheel/tire size
Gents!
I've been trying to decide on wheels for my car: and have a small concern.
The wheels I'm getting will be 9's all the way around: the owners manual does not show the S to have the same size wheels and tires( all staggered).
And I am wondering if this will be okay.
The tire size would be 265/35/20 on all 4 corners: and not staggered like the stock set-up...my car is 4 matic too,
Any help or comments may be helpful, many thanx!
I've been trying to decide on wheels for my car: and have a small concern.
The wheels I'm getting will be 9's all the way around: the owners manual does not show the S to have the same size wheels and tires( all staggered).
And I am wondering if this will be okay.
The tire size would be 265/35/20 on all 4 corners: and not staggered like the stock set-up...my car is 4 matic too,
Any help or comments may be helpful, many thanx!
#2
Member
Gents!
I've been trying to decide on wheels for my car: and have a small concern.
The wheels I'm getting will be 9's all the way around: the owners manual does not show the S to have the same size wheels and tires( all staggered).
And I am wondering if this will be okay.
The tire size would be 265/35/20 on all 4 corners: and not staggered like the stock set-up...my car is 4 matic too,
Any help or comments may be helpful, many thanx!
I've been trying to decide on wheels for my car: and have a small concern.
The wheels I'm getting will be 9's all the way around: the owners manual does not show the S to have the same size wheels and tires( all staggered).
And I am wondering if this will be okay.
The tire size would be 265/35/20 on all 4 corners: and not staggered like the stock set-up...my car is 4 matic too,
Any help or comments may be helpful, many thanx!
If you run a square setup on your MB, your steering will be nearly neutral. Good for drivers, bad according to the lawyers, because it's easier to spin out or swap ends. The square set up will work fine with your 4MATIC.
Enjoy !
#3
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
many thanx for the reply jrpisha
I had concerns about a 265 out front, but it seems it'll be fine
I had concerns about a 265 out front, but it seems it'll be fine
#5
MBWorld God!
Thread Starter
Join Date: Jul 2010
Location: on my way
Posts: 30,660
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
It worked out really well.
I still have the wheels, HRE, (and tires) from that set up if you want them....tires have probably dry rotted and one of the wheels needs to be refurbished but they're still high quality HRE wheels
Thanx for the thread bump
I still have the wheels, HRE, (and tires) from that set up if you want them....tires have probably dry rotted and one of the wheels needs to be refurbished but they're still high quality HRE wheels
Thanx for the thread bump