Oil Filter Installation
Thread Starter
Member
Joined: Feb 2021
Posts: 204
Likes: 52
From: Lower Westchester, NY
2018 s560v4
Oil Filter Installation
Today I did an oil and filter change on a m176 engine. The oil filter is on the bottom.
It was quit a simple job to do and after completing it I began to question if I installed the filter correctly. I say this because the filter is flat on one side and the other side has a few minor tabs.
which end goes into filter housing?
It was quit a simple job to do and after completing it I began to question if I installed the filter correctly. I say this because the filter is flat on one side and the other side has a few minor tabs.
which end goes into filter housing?
Thread Starter
Member
Joined: Feb 2021
Posts: 204
Likes: 52
From: Lower Westchester, NY
2018 s560v4
Senior Member
Joined: Mar 2010
Posts: 290
Likes: 48
From: Florida
2013 ML350, 2019 S560
Today I did an oil and filter change on a m176 engine. The oil filter is on the bottom.
It was quit a simple job to do and after completing it I began to question if I installed the filter correctly. I say this because the filter is flat on one side and the other side has a few minor tabs.
which end goes into filter housing?
It was quit a simple job to do and after completing it I began to question if I installed the filter correctly. I say this because the filter is flat on one side and the other side has a few minor tabs.
which end goes into filter housing?
