Part number needed
Super Member
Joined: Jun 2003
Posts: 713
Likes: 147
From: Aridzona
'15 S550, '10 E350 P1/P2, '02 ML320
Super Member
Joined: Jun 2025
Posts: 784
Likes: 251
From: USA
The part number you need is A222 990 00 85. It's the black "4-MATIC" badge for your sedan. Double-check your trunk to see if it has the adhesive foam already on it from the old badge; if so, you'll also need the foam gasket set A222 990 01 85. Your dealer can confirm the exact fit.
Thread Starter
Member
Joined: Oct 2021
Posts: 112
Likes: 16
S550
The part number you need is A222 990 00 85. It's the black "4-MATIC" badge for your sedan. Double-check your trunk to see if it has the adhesive foam already on it from the old badge; if so, you'll also need the foam gasket set A222 990 01 85. Your dealer can confirm the exact fit.
Super Member
Joined: Jun 2003
Posts: 713
Likes: 147
From: Aridzona
'15 S550, '10 E350 P1/P2, '02 ML320
The part number you need is A222 990 00 85. It's the black "4-MATIC" badge for your sedan. Double-check your trunk to see if it has the adhesive foam already on it from the old badge; if so, you'll also need the foam gasket set A222 990 01 85. Your dealer can confirm the exact fit.
In the Mercedes-Benz parts structure, the middle three digits of a part number (e.g., A 123 990 00 99) represent the parts group
or main group. Group 990 is commonly used for fastening parts, attaching parts, screws, bolts, nuts, washers, repair kits, and
other hardware/fasteners that don't fit into more specific mechanical or body groups.
Why would they need the black badge?
