When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm in the process of replacing my sunroof frame (long story documented here) and I'm stuck removing the headliner. Specifically, where the Alcantara headliner is attached to the sunroof opening. It seems to be wedged in this lip/binding here:
I'm following WIS, but the instructions simply read, "Loosen roof paneling (1) from sliding roof frame.", which for non-Alcantara headliners is pretty straightforward. Just pull it down as it's lightly wedged in a different fashion. The Designo Alcantara is different.
I want to do this the right way and I especially don't want to bend, break, or tear anything as a replacement headliner is expensive.
I have done this before on an S65 I still have a replacement unit sitting around in the garage. I'll take some pictures of it and post them to see if that helps.
I have done this before on an S65 I still have a replacement unit sitting around in the garage. I'll take some pictures of it and post them to see if that helps.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
Help: Removing the headliner
