Wheel spacers for my new S63 Cab
#1
Junior Member
Thread Starter
Wheel spacers for my new S63 Cab
Hi Folks - has anyone put spacers on their S63 Cab or Coupe? If so do you have size and brand recommendations? I have had them on previous cars and would like to add to this car. BTW - this car is awesome.
Thanks Much,
RJJM
Thanks Much,
RJJM
#2
MBWorld Fanatic!
iTrader: (3)
Join Date: Mar 2018
Location: Socal and Norcal
Posts: 1,410
Received 230 Likes
on
187 Posts
MY17 S63AMG - MBUSA Buyback. MY16 SL63 - Sold MY19 W213 E63s. 2020 W213 E63s Wagon
I have the MY17 S63 sedan and am going to order 10" front and 12" rear H&R spacers. Will sit flush with fender and lower a bit.
#5
MBWorld Fanatic!
Ive used spacers on many cars. You can buy cheaper ones on ebay. They are all about the same, just different cost. You have to have hub centric with flanges.
#6
Senior Member
I have H&R hubs on my 2017 s63 cabriolet
I used 15mm both front and back on each side which looks awesome and well balanced on 20 “ OEM rims.
I am still a bit concerned that while the hub centric nicely into the wheel rim, there is a slight looseness on the lip on the axel hub.
I don’t believe yet, that this is acceptable and I’m not sure if I can feel it while driving, the roads are never smooth enough at the right speeds. I may temporarily use pvc tape to rap the hub centre to see if I can feel an improvement. If anyone has any ideas or alternatives to H&R since they don’t list a S63, I used the ones they sell for a C63.
I am still a bit concerned that while the hub centric nicely into the wheel rim, there is a slight looseness on the lip on the axel hub.
I don’t believe yet, that this is acceptable and I’m not sure if I can feel it while driving, the roads are never smooth enough at the right speeds. I may temporarily use pvc tape to rap the hub centre to see if I can feel an improvement. If anyone has any ideas or alternatives to H&R since they don’t list a S63, I used the ones they sell for a C63.
The following users liked this post:
daviper (01-23-2020)
#7
Junior Member
Trending Topics
#9
I used 15mm both front and back on each side which looks awesome and well balanced on 20 “ OEM rims.
I am still a bit concerned that while the hub centric nicely into the wheel rim, there is a slight looseness on the lip on the axel hub.
I don’t believe yet, that this is acceptable and I’m not sure if I can feel it while driving, the roads are never smooth enough at the right speeds. I may temporarily use pvc tape to rap the hub centre to see if I can feel an improvement. If anyone has any ideas or alternatives to H&R since they don’t list a S63, I used the ones they sell for a C63.
I am still a bit concerned that while the hub centric nicely into the wheel rim, there is a slight looseness on the lip on the axel hub.
I don’t believe yet, that this is acceptable and I’m not sure if I can feel it while driving, the roads are never smooth enough at the right speeds. I may temporarily use pvc tape to rap the hub centre to see if I can feel an improvement. If anyone has any ideas or alternatives to H&R since they don’t list a S63, I used the ones they sell for a C63.
The following users liked this post:
jnash (01-27-2020)
#11
@daviper did you ever get these ECS Tuning spacers? did they have a play on the axle hub?
#13
Thanks daviper! Do you happen to have the ECS part numbers by any chance?
Are yours black or silver?
I searched their site and couldn't match a pair to a MY 2017 S63 Cabriolet
Are yours black or silver?
I searched their site and couldn't match a pair to a MY 2017 S63 Cabriolet
with H&R 55mm Extended Bolts - ECS Part # ES#1303149 or H&R Part # 1455502
The following users liked this post:
jnash (04-22-2020)