AMG Designo Paint
Thread Starter
Newbie
Joined: Apr 2015
Posts: 4
Likes: 0
2010 CLS 550; 2006 CLS 55 AMG; 2013 CLS 63 AMG 2016 AMG CLS 63 2019 AMG GT 63 2021 AMG GT 63s
AMG Designo Paint
Looking for ideas on how to correct a mistake I made recently on the exterior of my 2021 MB AMG GT 63s. I used a well known scratch remover application but after buffing it off with a soft cloth was left with this spot. See attachments. The original MB AMG paint is the Designo Selenite Grey Mango. I have subsequently ordered spray paint from TouchUpDirect but welcome comments/advice before I use it to cover over this small area. Tks in advance.
Super Member
Joined: Jul 2014
Posts: 808
Likes: 281
.
Before further ruining your paint, please go to a well regarded body shop with knowledge and work experience with Factory Matte/Satin paints
Your options will likely be Very Limited, but at least you will have a Professional offering further advice and potential management.
Super Member
Joined: Jul 2014
Posts: 808
Likes: 281
.
Awe man, just saw your second photo - you used Meguiar's Scratch-X compound on your Magno matte finish 
Damn.
Unfortunately, this product is NOT compatible in any way with Matte finishes - only with "Shiny"/Gloss finishes, as noted on the back of the bottle.
Scratch-X works like a rubbing/polishing compound that ruins the Magno's clear coat - this special clear coat is what gives your vehicle's finish that Matte/Satin property.
Your only likely choice to mitigate your now mildly damaged finish, is to perhaps consider full coverage with a Matte/Satin PPF Film, such as XPEL Stealth, etc
But def see what a knowledgeable body shop well versed in Factory matte finishes can offer
Damn.
Unfortunately, this product is NOT compatible in any way with Matte finishes - only with "Shiny"/Gloss finishes, as noted on the back of the bottle.
Scratch-X works like a rubbing/polishing compound that ruins the Magno's clear coat - this special clear coat is what gives your vehicle's finish that Matte/Satin property.
Your only likely choice to mitigate your now mildly damaged finish, is to perhaps consider full coverage with a Matte/Satin PPF Film, such as XPEL Stealth, etc
But def see what a knowledgeable body shop well versed in Factory matte finishes can offer
Last edited by MBNRG; Sep 17, 2025 at 01:17 AM.
