When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a set of ADV-1 5.01 SL wheels for sale. The wheels are 19" x 8.5" for the fronts and 19" x 10" in the rear. I am asking $3800 for the set.
The wheels have been completely refinished to remove curb marks and the oxidation of the clear coat from the heat and brake dust. The wheels are in perfect condition and not out-of-round, there are no unpleasant surprises. I am selling the wheels only, with TPMS sensors. I will include, at no charge, a pair of Michelin Pilot Supersport rear tires (265/30 ZR19).
I am the original owner of the wheels. The wheels are located at my workplace, in Queens, NY. I will make a preference to sell these locally, but I will ship at the cost to the buyer's zip code.
You can PM me or message me at 917 664 5616 to discuss or to make arrangements. Thanks for reading!
Yeah man, I agree. I've been a total Audi fanboy for almost 15 years now; since I got my first A4. IMO, back then Audi was ahead of Bimmer/MB when comparing strait across the board and especially when comparing AWD systems. Now I feel that Audi has plateaued and MB has taken back over. Hence why I went C450 over waiting for the new S4 or going 340/440i. the redesign of the bimmers from the 35s to the 40s was definitely better, but just didn't 'do it' for me. And not a lot of great reviews of the upcoming B9 S4 compared to every reviewer being ecstatic over the c450/43.
Mercedes is making a damn good car these days. And if it's a full blown AMG, or even a "sport line" like mine, it's almost no contest.
Anyways, good luck with the sale. If they're still available in 2-3 months, I might be taking them off your hands.
Sorry guys for jumping into thread, but i reckon you have much experience about aftermarket wheels... So I had to ask... I have W205 C250 petrol Merc with stock wheel dimensions:
OK, so far so good... I thought it would be nice to put something wider on it, maybe Vorsteiner V-FF 103 Flow Forged wheels in the following dimensions:
front: 245/35R19 8.5x19 ET unknown
rear: 275/30R19 10x19 ET unknown
bolt pattern: 5x112
The questions are:
1. Do I need spacers or adapters for such adventure?
2. Do you have any recommendations regarding brands I should look at, BBS, OZ, Vossen etc?
3. Do you have any general advice for a wheel noobie like me, that could help me in choosing the right product?
Those should also bolt right up to a W220/221 S Class and W215/216 CL Class.
Might want to post them there as well.
Thanks Mike! Are you certain about that? I (incorrectly) assumed that those platforms had a completely different offset. I'm asking because I have no idea haha.
The 204/220/221/215/216 shared a 44mm OEM offset. Should be a direct fit (presuming yours are at a 44-ish offset). Even if yours are in the 35mm range they'll still fit, just a bit wider stance.