When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Chris, were u able to code so warning lights would not appear in dash? and did you move any of the pins on the connectors to make the lights illuminate correctly
If anyone is intrested I have ALOT of facelift parts that I got doubble on...Tailights,headlights,vents,clocks,switchrows, steeringwheels,comands,Speedometers both reagular and AMG and on and on..
Last edited by Chris The Swede; 09-15-2016 at 12:47 PM.
Just some fine adjustments left and then it is ready for the car.
Hi Chris,
very good job!
I need your help, and with retrofit of my e350, I want to install rear bumper from facelift but I want to fit c-class W205 style pipes, like the picture, do you know If I can do it??
if you manage to install them without any modification let me know
i m also interesed
i tried to install the exhaust tailpipes like chris and they don 't fit ...allthough i cut the rear diffuser
Originally Posted by toni100w
Hi Chris,
very good job!
I need your help, and with retrofit of my e350, I want to install rear bumper from facelift but I want to fit c-class W205 style pipes, like the picture, do you know If I can do it??
Love your work. About to start doing some conversions. Have a couple question please:
1) My center vent has a Traction Control Off button, when replacing it with the new clock center vent, am I correct that I would lose the ability to turn off traction control unless I upgrade to a new instrument cluster?
2) Would headlights from Europe UK/Germany/etc work here in US? Looks like their headlights don't have the US amber lens in them. Do you think there would be a problem with operation of the active LED headlights because of the left vs right hand drive and maybe different alignment of the light beams? I currently have the active curve and auto highbeam 2010 headlights. Would these europe lights be able to be coded to a US vehicle?
3) For the rear taillights, I would like to go the route without programming. Can you please tell us the re-pinning and resister value needed?
Originally Posted by Asghar.ali262 HI Dear,
i am converting my W207 2011 to 2014 Facelift Version with LED lights,front Sam,Front & Rear Bumper,Side Skirts and Back Lights,
now the problem is that the headlights are not working,i have installed the new SAM but no good,
Could you guide me what should i do how can i make this work or is their anything missing,
i have came to know something about you that you can provide a wiring harness converter, and also do the programming remotely.
plz contact me
much appreciated,
Regards
Love your work. About to start doing some conversions. Have a couple question please:
1) My center vent has a Traction Control Off button, when replacing it with the new clock center vent, am I correct that I would lose the ability to turn off traction control unless I upgrade to a new instrument cluster?
2) Would headlights from Europe UK/Germany/etc work here in US? Looks like their headlights don't have the US amber lens in them. Do you think there would be a problem with operation of the active LED headlights because of the left vs right hand drive and maybe different alignment of the light beams? I currently have the active curve and auto highbeam 2010 headlights. Would these europe lights be able to be coded to a US vehicle?
3) For the rear taillights, I would like to go the route without programming. Can you please tell us the re-pinning and resister value needed?
Thanks!
Sorry...Missed this post:
1. You can code your old to have this menu in it.
2. It works fine.
3. No clue for that. I code.
PM me if parts are needed. Have a lot of leftovers.
Originally Posted by Asghar.ali262 HI Dear,
i am converting my W207 2011 to 2014 Facelift Version with LED lights,front Sam,Front & Rear Bumper,Side Skirts and Back Lights,
now the problem is that the headlights are not working,i have installed the new SAM but no good,
Could you guide me what should i do how can i make this work or is their anything missing,
i have came to know something about you that you can provide a wiring harness converter, and also do the programming remotely.
plz contact me
much appreciated,
Regards