ABC Malfunction - Stop the car now(CL63)
#1
ABC Malfunction - Stop the car now(CL63)
Since it got colder I have been driving my car not as often, about 2-3 times a week with each drive about 20 miles. Today, after 3 days of sitting I wanted to drive it to my office. First 10 minutes everything was all right, then yellow warning "ABC Malfunction" came on. I thought just an error, stopped the car, switched of the engine and went outside = ride height was fine, no problems. Started driving again, after about 10 minutes another message came on "ABC Malfunction - Stop the car now" in red color. Managed to get it right to the local MB dealership, which was 2 minutes from where this happened. When I stopped the car and looked at it from outside:
1) smoke from the engine (hydraulic fluid everywhere in the engine)
2) ride height dropped dramatically on front right side
3) hydraulic fluid under the car
I think a hose or something like that. Wonder, how much this will be. Will keep you informed as soon as they call me.
This is a photo of a yellow message, which was 10 minutes before everything went ultra wrong.
1) smoke from the engine (hydraulic fluid everywhere in the engine)
2) ride height dropped dramatically on front right side
3) hydraulic fluid under the car
I think a hose or something like that. Wonder, how much this will be. Will keep you informed as soon as they call me.
This is a photo of a yellow message, which was 10 minutes before everything went ultra wrong.
#4
ABC malfunction
Hi guys i have question about ABC malfunction on my CL63 2012
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
Last edited by Martin V; 06-19-2021 at 03:31 AM.
#5
Member
Joined: Jul 2017
Posts: 84
Likes: 11
From: Pasadena, CA
2009 CL63 AMG (CL55 AMG Kompressor previous vehicle)
Check your hydraulic fluid!
Checl the level of the fluid immediately! Also check the color. Alot of times, the yellow light alone can be a warning for low fluid and a simple top off can prevent further issues. Also to the original poster, ive haf to deal with the same issue. Luckily in both our cases, the pump was not damaged.
#6
last reply
Hi guys i have question about ABC malfunction on my CL63 2012
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
+ when my abc malfunction error pops up the only thing that doesn't work for me is the real front abc shock absorber
when i pick up the car all work except the right front
can you advise me what could be a mistake
and
error code 5105 right-hand front suspension arm plunger check valve
Hi guys i have question about ABC malfunction on my CL63 2012
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
+ when my abc malfunction error pops up the only thing that doesn't work for me is the real front abc shock absorber
when i pick up the car all work except the right front
can you advise me what could be a mistake
and
error code 5105 right-hand front suspension arm plunger check valve
Last edited by Martin V; 06-19-2021 at 03:58 PM.
The following users liked this post:
biker349 (06-19-2021)
#7
last reply
Hi guys i have question about ABC malfunction on my CL63 2012
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
+ when my abc malfunction error pops up the only thing that doesn't work for me is the real front abc shock absorber
when i pick up the car all work except the right front
can you advise me what could be a mistake
and
error code 5105 right-hand front suspension arm plunger check valve
Hi guys i have question about ABC malfunction on my CL63 2012
I will give me a yellow error ABC malfunction when I stand running on P for a long time I will classify D and after a few seconds I will give me abc malfunction you can not advise me what the problem may be? did it before changing the set of abc oil and the filter
thank you for the information
+ when my abc malfunction error pops up the only thing that doesn't work for me is the real front abc shock absorber
when i pick up the car all work except the right front
can you advise me what could be a mistake
and
error code 5105 right-hand front suspension arm plunger check valve
Trending Topics
#8
yes you need buy brand new velve block
this type cannot be repased, you need to buy a new one and if you have a model before, it can be repased
this is facelift valve block
https://abcteile24.de/en/produkt/ven...r230-r231-neu/
#9
yes you need buy brand new velve block
this type cannot be repased, you need to buy a new one and if you have a model before, it can be repased
this is facelift valve block
https://abcteile24.de/en/produkt/ven...r230-r231-neu/
this type cannot be repased, you need to buy a new one and if you have a model before, it can be repased
this is facelift valve block
https://abcteile24.de/en/produkt/ven...r230-r231-neu/
#11
#14
So you have to buy it all velve block
on abc teile 24 have repased velve block with the price 1000€... this velve block its to much
but since I exchanged it so there has been no problem so far so I am satisfied!
there is no other way
#15
ABC malfunction
Since it got colder I have been driving my car not as often, about 2-3 times a week with each drive about 20 miles. Today, after 3 days of sitting I wanted to drive it to my office. First 10 minutes everything was all right, then yellow warning "ABC Malfunction" came on. I thought just an error, stopped the car, switched of the engine and went outside = ride height was fine, no problems. Started driving again, after about 10 minutes another message came on "ABC Malfunction - Stop the car now" in red color. Managed to get it right to the local MB dealership, which was 2 minutes from where this happened. When I stopped the car and looked at it from outside:
1) smoke from the engine (hydraulic fluid everywhere in the engine)
2) ride height dropped dramatically on front right side
3) hydraulic fluid under the car
I think a hose or something like that. Wonder, how much this will be. Will keep you informed as soon as they call me.
This is a photo of a yellow message, which was 10 minutes before everything went ultra wrong.
1) smoke from the engine (hydraulic fluid everywhere in the engine)
2) ride height dropped dramatically on front right side
3) hydraulic fluid under the car
I think a hose or something like that. Wonder, how much this will be. Will keep you informed as soon as they call me.
This is a photo of a yellow message, which was 10 minutes before everything went ultra wrong.