RW carbon brabus facelift splitter
Trending Topics
#8
SPONSOR
Some customers have installed with just tape, I would not recommend it however. Should be installed with 3M tape and at least a few screws on the ends. Have these in stock ready to go
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#9
Senior Member
#11
MBWorld Fanatic!
I have one, love it. Price is good, fit is good, dealing with RW is easy. As they said, just take your time and apply it the right way the first time and you're good. Mine was put on with double sided tape and just not enough so one side started to sag a bit. But, when you use your hand to push it back together the fit is perfect.
Part of me kind of just wants to glue it there but I also don't want to make it permanent. I think the best way would be a generous amount of 3m double sided tape and a couple of screws from underneath. This way the only thing that could be permanent would be some screw holes you'd never see anyway.
Regardless, great product and a good buy.
As for installation, I had mine put on along with springs and endlinks in a couple of hours. I bet it takes 30 minutes really... Yes, the front piece had to be removed but the installers didn't seem to have any problems.
Part of me kind of just wants to glue it there but I also don't want to make it permanent. I think the best way would be a generous amount of 3m double sided tape and a couple of screws from underneath. This way the only thing that could be permanent would be some screw holes you'd never see anyway.
Regardless, great product and a good buy.
As for installation, I had mine put on along with springs and endlinks in a couple of hours. I bet it takes 30 minutes really... Yes, the front piece had to be removed but the installers didn't seem to have any problems.
#12
Member
Thread Starter
I have one, love it. Price is good, fit is good, dealing with RW is easy. As they said, just take your time and apply it the right way the first time and you're good. Mine was put on with double sided tape and just not enough so one side started to sag a bit. But, when you use your hand to push it back together the fit is perfect.
Part of me kind of just wants to glue it there but I also don't want to make it permanent. I think the best way would be a generous amount of 3m double sided tape and a couple of screws from underneath. This way the only thing that could be permanent would be some screw holes you'd never see anyway.
Regardless, great product and a good buy.
As for installation, I had mine put on along with springs and endlinks in a couple of hours. I bet it takes 30 minutes really... Yes, the front piece had to be removed but the installers didn't seem to have any problems.
Part of me kind of just wants to glue it there but I also don't want to make it permanent. I think the best way would be a generous amount of 3m double sided tape and a couple of screws from underneath. This way the only thing that could be permanent would be some screw holes you'd never see anyway.
Regardless, great product and a good buy.
As for installation, I had mine put on along with springs and endlinks in a couple of hours. I bet it takes 30 minutes really... Yes, the front piece had to be removed but the installers didn't seem to have any problems.
Sounds good thankyou
Did you install it yourself? If so any info on how to remove the lower centre bumper section?
#13
MBWorld Fanatic!
I did not. But I think it is just a few snaps like most other things.
#14
Member
Thread Starter
Hey guys, new to the site. I am selling a brandnew Real Wald Black Bison complete aero kit for w212 e class from 2010-2012. The only thing I dont have is the trunk spoiler cause at the time I didnt care for it. But I have the wicked fenders with grill and fin blades, i paid $3,000 for fenders alone. So I have front bumper, foglights, fenders, sideskirts, rear bumper with attached diffuser, reflectors, and double stack exhuast tips. My num is 803 412 7757. I paid over 11,000 and just asking 6,500. I never installed it so if you want to see pics ill send it. Thanks
#16
MBWorld Fanatic!
It secures to the bottom center section of the factory bumper. The factory bumper has an insert which is the only thing that comes out and you reinsert with the lip. Then double sided tape on the sides