NSAMG

Well the weather finally looks like its going to warm up. So next week I am getting the car Opti- coated, and lowered. I have the KW HAS. I replaced the rear tires with 295s, and I have no spacers. So my question is, how low can I go without rubbing ? oh its a Coupe 19 front 20 rear thanks.

Sanch

20mm all around

JPMBenz

So 20 MM on Front/Rear with a drop (HAS or V3's) with stock fronts & 295's at the rear isn't a issue??

Sanch

I had a 20mm drop with 295s and a 10mm spacer.

JPMBenz

I didn't understand what you meant by a 20MM; I thought you meant spacer. LOL

Sanch

Haha my bad... if you're going that low you will need spacers up front - wheels will look really tucked in.

JPMBenz

I plan on that; i'll adjust/address once the V3's go in.

Vic55

I'm about as low as one can go on the KW HAS up front.. no rubbing with my oem wheels and 18mm spacer set up. The rear still has 1 1/2 inches of coils left to turn but I don't need to drop it further (18mm spacers rear too):

AutoTalent

There's no such thing as to low

shoe3k

Any time I see this type of drop, it bother me so much and I don't know why.

NSAMG

Looks great Vic. So how many mm did you lower it from stock ?

Vic55

I dont think I ever got that info, when Im home I can measure from the ground up though...