Great day of dyno tuning in Allentown.
#1
Thread Starter
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,482
Likes: 25
From: new ringgold pa
99 ford lightning
Great day of dyno tuning in Allentown.
Thankfull Tony from raceiq made the trip to tune these cars. It was a warm day and we all made some power gains. It was neat to still make 492hp on a day thats 80deg out on the stock pulley, compared to when i dynoed in fall temps. did a race tune it picked up everywhere 498hp wasnt bad since the ic temps were going up. Georges car picked up big time. James made the day fun, and not one got hurt. Very nice cars at the shop today.
The following users liked this post:
seanol (04-30-2017)
#4
A huge thanks to George for organizing (not to mention getting my car's priorities in order), Tim for hosting and everyone that joined this truly awesome event! Mr. Anthony Lawshee (RaceIQ Engineering) is a true wizard . . . if you have a MB you NEED to contact him!
Below are some vids/pics:
https://tinyurl.com/k82yp43
Below are some vids/pics:
https://tinyurl.com/k82yp43
Last edited by amg_4_life; 04-30-2017 at 08:13 PM. Reason: Vid/pic link fixed
#6
Thread Starter
MBWorld Fanatic!
Joined: Dec 2011
Posts: 1,482
Likes: 25
From: new ringgold pa
99 ford lightning
we just did the last run for fun i had straight 104 in it. That first dyno run was in 52 deg shop temps 496hp. so it was nice to see it being 82 deg out it made 492hp the last run again it was heating up pretty good had tony just do a let it rip run, and 498hp it is. I wont use the race tune untill i hook this street tune. car as you know spun cut out on shifts going 122mph so power is there. Last 2 dyno runs were in 4th gear due to 306 gear swap.
Trending Topics
#12
A few pics of the PA Dyno this past Saturday. THANK YOU Tony from Race IQ for coming out.
Everyone had a blast and everyone is pleased with their results.
E55(06) 77mm FSC Pulley, Race IQTune ECU & TCU Tune, 82mm TB, 550 Injectors, Kleeman Headers,3" straight exhaust w/X pipe, Wavetrac LSD w/306 gears,Belt Wrap Kit, Star Lowered, Colder Plugs, E63 conversion, CF Front Spoiler, CF rear defusser, Pierburg CWA100 IC pump, Split Cold Box, VRP secondary HE,EC HE, VRP 3" intake kit
S65 Just straight exhaust no mufflers
E55(05) split and 83mm csp.
E55(05) MPH long tube Headers, split, 306 gears, stall converter.
E55(05) 77mm clutched pulley. dual heat exchanger, MPH Headers.
E55(05) Upper and lower pulley not sure size.
Tony doing a e55 TCU tune.
Tony Tuning my buddies ECU for an Audi RS7 2016 (120Hp 160Tq)
Everyone had a blast and everyone is pleased with their results.
E55(06) 77mm FSC Pulley, Race IQTune ECU & TCU Tune, 82mm TB, 550 Injectors, Kleeman Headers,3" straight exhaust w/X pipe, Wavetrac LSD w/306 gears,Belt Wrap Kit, Star Lowered, Colder Plugs, E63 conversion, CF Front Spoiler, CF rear defusser, Pierburg CWA100 IC pump, Split Cold Box, VRP secondary HE,EC HE, VRP 3" intake kit
S65 Just straight exhaust no mufflers
E55(05) split and 83mm csp.
E55(05) MPH long tube Headers, split, 306 gears, stall converter.
E55(05) 77mm clutched pulley. dual heat exchanger, MPH Headers.
E55(05) Upper and lower pulley not sure size.
Tony doing a e55 TCU tune.
Tony Tuning my buddies ECU for an Audi RS7 2016 (120Hp 160Tq)
Last edited by ghlainez; 05-02-2017 at 03:34 PM.
#13
That e55 with the black intakes loose power with that on??
No offense guys but those sheets should have the mods listed on them for there before and after gains.It's a but confusing to and understand what's going on.Great work tony as always
No offense guys but those sheets should have the mods listed on them for there before and after gains.It's a but confusing to and understand what's going on.Great work tony as always
#14