Ripped intake hose
#1
Member
Thread Starter
Ripped intake hose
![](https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/555x370/115723329_ab0ca918a0c55daaf18c007c99677b4a32ed4a86.jpg)
My intake hose (marked in picture with red arrow) is ripped and I ordered a new hose. I know how to remove the flat panel that sits on top of the front grill and how to detach the tube from this panel, but I don't know how this tube detaches from the airbox.
Does it just pull out from the airbox? I don't want to yank at it and damage the airbox.
#2
MBWorld Fanatic!
![](https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/555x370/115723329_ab0ca918a0c55daaf18c007c99677b4a32ed4a86.jpg)
My intake hose (marked in picture with red arrow) is ripped and I ordered a new hose. I know how to remove the flat panel that sits on top of the front grill and how to detach the tube from this panel, but I don't know how this tube detaches from the airbox.
Does it just pull out from the airbox? I don't want to yank at it and damage the airbox.
The following users liked this post:
Tanqueray (06-28-2017)