Metal Rear Fenders
#77
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,067
Received 2,849 Likes
on
1,680 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
That's the inside of the tire where it's rubbing on the strut? I'd go 10mm to be safe if you have the room on the outside. Wider track in front is never a bad thing anyway.
#78
#80
Senior Member
Guys I have decided I an going to extend the fronts on mine at the same time I do the rears.
The question is what et would I need to clear the strut for a 9.5" x 19 running a 265/35?
I plan to do 12" x 19 et 30 rear running a 305/30
The question is what et would I need to clear the strut for a 9.5" x 19 running a 265/35?
I plan to do 12" x 19 et 30 rear running a 305/30
#81
MBWorld Fanatic!
Car is looking good! Kind of surprised you left the sidemarkers though. I think i would have had those filled in.
#82
Super Member
Thread Starter
#85
its looking amazing mate
#88
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,067
Received 2,849 Likes
on
1,680 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
It's gonna be so sick.
What color black did you go with. I'm going to need a full repaint over the winter, and am looking for the deepest inkiest black there is. Yours looks good.
What color black did you go with. I'm going to need a full repaint over the winter, and am looking for the deepest inkiest black there is. Yours looks good.
#90
MBWorld Fanatic!
#91
MBWorld Fanatic!
#94
MBWorld Fanatic!
#96
Super Member
Thread Starter
The car had issue with the front bumper. Started cracking. It’s back at the shop atm. I have these pictures for now. Wheels were redone in full bronze. Wasn’t diggging the gold. Also made them a tad wider. 3” lips all around. 10x19 11x19
#97
Super Member
Thread Starter
Hard to tell the fenders were widened which means they were done proepertly.
Update. Car is painted. Wheels are fitted. Needs to be aligned still. Sitting on 10x19 11x19 R888 265/30 295/30.
The following users liked this post:
Mr Jones (01-28-2018)
#100
Senior Member