When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
my seats stopped working, the inflatable portions anyway. i popped off the rear of the seat, its just 2 screws in the rear at the bottom and i found unplugged vacuum hoses on both seats accessible with ease. plugged in the hoses and multi-contour seats are working again, even the side bolsters i believe, might have to check again.
my seats stopped working, the inflatable portions anyway. i popped off the rear of the seat, its just 2 screws in the rear at the bottom and i found unplugged vacuum hoses on both seats accessible with ease. plugged in the hoses and multi-contour seats are working again, even the side bolsters i believe, might have to check again.
Today my brake light went out but then i replaced it
my seats stopped working, the inflatable portions anyway. i popped off the rear of the seat, its just 2 screws in the rear at the bottom and i found unplugged vacuum hoses on both seats accessible with ease. plugged in the hoses and multi-contour seats are working again, even the side bolsters i believe, might have to check again.
Yeah, that's the usual fault. Best to add a small zip tie to be sure they don't separate again
Speaking of the rear seat covers......the guys at the c63 section can get those in carbon fiber. Not sure how that would look on a w202 but im sure its doable.