Airtex E8572M Fuel Pump Module Assembly
#1
Senior Member
Thread Starter
Airtex E8572M Fuel Pump Module Assembly
The Airtex E8572M Fuel Pump Module Assembly does not have the same out flow connection as the A 211 470 00 00.
Sorry for the out of focus This is the A 211
This is the Airtex
Sorry for the out of focus This is the A 211
This is the Airtex
#2
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,289
Received 964 Likes
on
748 Posts
'99 and '05 E55 AMG
The Airtex would have to be used with the old-style fuel filter/regulator where the lines fit inside the pumps' fittings and are held in place by plastic clips.
The ones that should fit with the Airtex are:
A211 470 24 94
A211 470 51 94
The A211 470 64 94 filter is used with the A211 470 00 00 fuel pumps. These use the fuel line connectors that fit over the pumps' fittings.
The ones that should fit with the Airtex are:
A211 470 24 94
A211 470 51 94
The A211 470 64 94 filter is used with the A211 470 00 00 fuel pumps. These use the fuel line connectors that fit over the pumps' fittings.
Last edited by bbirdwell; 10-04-2017 at 01:05 PM. Reason: entry error
The following users liked this post:
Pmarino (10-04-2017)
#3
Senior Member
Thread Starter
I'm trying to change the filter in the sender. I have ordered a new one and tried cleaning the old one. I'm still blowing the fuse. I thought maybe it's the sock filter and ordered the airtex. Now getting the 211 470 00 00 and sending back the airtex.
Also ordered one of these
Also ordered one of these
Last edited by Pmarino; 10-04-2017 at 01:28 PM.
#4
MBWorld Fanatic!
Join Date: Jan 2014
Location: Republic of Texas
Posts: 3,289
Received 964 Likes
on
748 Posts
'99 and '05 E55 AMG
I'm trying to change the filter in the sender. I have ordered a new one and tried cleaning the old one. I'm still blowing the fuse. I thought maybe it's the sock filter and ordered the airtex. Now getting the 211 470 00 00 and sending back the airtex.
Also ordered one of these https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Also ordered one of these https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
#5
Senior Member
Thread Starter
#6
MBWorld Fanatic!
The other option might be an attempt to swap the old fitting onto the new line on the new pump assembly...
That said those plastic lines are very hard and not easily seperated from the fittings like rubber hose would be....
And the lines might even be different sizes where the slip into the fitting.
I did this on a w211 e350 once. It was not fun to do.
That said those plastic lines are very hard and not easily seperated from the fittings like rubber hose would be....
And the lines might even be different sizes where the slip into the fitting.
I did this on a w211 e350 once. It was not fun to do.