Hitch Height
Thread Starter
Newbie
Joined: Sep 2020
Posts: 4
Likes: 3
2018 GLE63s
Hitch Height
Huge favor to ask... Can someone with a stock ride height GLE63S (2018 class) check the height of the trailer hitch from the ground? I'm on a trip away from my car for a week, and need to pick up the boat as soon as I get home, so I want to have the hitch waiting for me, otherwise I'd just measure myself. I just bought a boat and will be towing it with my 2018, and since this is the first time I'll be setting up a vehicle for towing, I'm getting a little obsessive over making sure the trailer is level. I know a couple inches of height difference barely changes the degree rise over the length of a single axle trailer, but I'd rather be closer than not.
FWIW, it's a small boat (flats skiff - 18' and <1,500 loaded), so not worried about trailering capacity.
FWIW, it's a small boat (flats skiff - 18' and <1,500 loaded), so not worried about trailering capacity.
Member
Joined: Dec 2017
Posts: 111
Likes: 36
GLE 63S
if you need an extension, I got mine from Wilco offroad. https://wilcooffroad.com/shop/wobble...tch-extension/
Last edited by Twilighthan; May 2, 2021 at 04:04 PM.
Thread Starter
Newbie
Joined: Sep 2020
Posts: 4
Likes: 3
2018 GLE63s
The trouble I was having was more the 7.5" shaft length. The 2 inch drops turned upside down tend to be 3/4" rise. I ended up getting one with a 8.25" shaft length - even though it's longer than it should be, since I'm towing a pretty light load, the impact on the receiver should be low enough to still fall well within capacity limits.
Super Member
Joined: Dec 2013
Posts: 630
Likes: 177
From: SW Ontario Canada
2020 GLS580, 2023 Corvette Z06
The trouble I was having was more the 7.5" shaft length. The 2 inch drops turned upside down tend to be 3/4" rise. I ended up getting one with a 8.25" shaft length - even though it's longer than it should be, since I'm towing a pretty light load, the impact on the receiver should be low enough to still fall well within capacity limits.
MBWorld Fanatic!
Joined: Oct 2009
Posts: 7,057
Likes: 2,214
From: Colorado
'21 AMG53 wDPP & ARC, 19 GLC300 - Former-03 C240,2 ML BlueTecs,20 GLE450 E-ABC,15 Cayenne D,17 Macan
That's important. The farther the ball is behind the 7.5" spec, the more leverage the load exerts on the hitch. It's geometry. If you double the distance you halve the capacities. You'll definitely feel it.
Trending Topics
Junior Member
Joined: Aug 2014
Posts: 71
Likes: 1
From: SoCal
2018 GLS 550; 2018 Volvo XC90
I was having the same trouble finding a 7.5" length when most drawbars are longer than that. Here's e-trailer's response to my question with a recommendation that is relevant to any model requiring these specs: https://www.etrailer.com/question-537457.html?fb=yes
MB World Stories
The Best of Mercedes & AMG
Dubai Tuner Gives the Mercedes G-Class An Entirely New Look
Verdad Gallardo
Six Gift Ideas Your AMG Loving Dad or Grad Will Cherish
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
