2012 ML 350 BlueTec- Limp mode, no check engine light, no codes
#1
Newbie
Thread Starter
Join Date: May 2012
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
2012 ml350 bluetec
2012 ML 350 BlueTec- Limp mode, no check engine light, no codes
Upon entering a highway or accelerating from traffic, kicks into limp mode no CEl/no codes, resets when vehicle is shut off and turned on again. Then runs fine at highway speeds. Anyone experience this issue
#4
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,069
Received 1,730 Likes
on
1,380 Posts
1922 Ford Model T / no OBD
SAFE mode during acceleration is typical for intercooler leaks. Look for oily stains on the system.
#5
2012 ML 350 BlueTec- Limp mode, no check engine light, no codes
Hi, So about a month and a half prior I was experiencing Limp Mode difficulties. Consistently driving, Limp mode would hit me eventually. It would likewise give me Check Motor Light. (Not ready to change past second gear). So then, at that point, I took it to a technician and he cleared the transmission codes and afterward from that point forward I at no point ever had that issue in the future... Until now.