C63/C63S AMG
Sponsored by:
Sponsored by:

Those with JB4 come in side....

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-19-2024, 03:56 PM
  #1  
Junior Member
Thread Starter
 
Dr.Ron's Avatar
 
Join Date: Jan 2021
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
C7 Z06
Those with JB4 come in side....

Did you install all 6 or just 4 of the plugs to sensors? I did 4 and asked them about the final 2 and they said install them. I had not driven the car yet. I did, drove the car & after 20 min of powerful driving I got codes and a CEL. Now they want me to disconnect those last 2 plugs, but I'm afraid to lose paramaters in the tune....no?
Any input?
Old Today, 09:59 AM
  #2  
Junior Member
Thread Starter
 
Dr.Ron's Avatar
 
Join Date: Jan 2021
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
C7 Z06
Update. I found that 1 pin from one of the last 2 connectors had backed out from the connector so that connector was shorting and causing the CEL. I was able to get it back into place and reconnected that connector and the CEL was immediately gone and the car was at full power.

Ron

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Those with JB4 come in side....



All times are GMT -4. The time now is 12:11 PM.