SL/R129: My Merced the enegensiwch that send the signal to the start didn't work
Thread Starter
Newbie
Joined: Mar 2015
Posts: 3
Likes: 0
95 Sl320 Merceds converable
My Merced the enegensiwch that send the signal to the start didn't work
I can start my car with a push button hookup to the starter fond our my wires all got power in but on one wire to the enegenswich and it the one that send the signal to the enegen to start the my Mercedes is they any way to get power to that wire so it start the car your do I need a enegnswich put in it it start and drive with the pitch button on the starter and it drive great....all the wires it goes to enegenswich ask have power but the one it send the singel to the starter so it's there a way to get power to that line to see if it start to bake sure that the problem your what can I do....to fix it you have to have special told to get that out so I was wandering if there was a way to get power to that one wire to make sure it is it....thank you if your can tell what I can do to fix it so it not on a push button
Junior Member
Joined: Aug 2013
Posts: 30
Likes: 1
2002 SL600 Silver Arrow, 2009 Smart, 1966 300SE Cabriolet
I can think of 3 possibilities, I'm sure others can think of more.
1. Ignition switch is faulty.
2. The K38 relay isn't working properly.
3. Biodegradable engine wiring harness has failed.
1. Ignition switch is faulty.
2. The K38 relay isn't working properly.
3. Biodegradable engine wiring harness has failed.
