SL/R230: MikBox on 2004 SL 500 with V710 - Installation slides
#26
MBWorld Fanatic!
Join Date: Dec 2004
Location: Tampa, FL
Posts: 3,063
Likes: 0
Received 22 Likes
on
14 Posts
2005 S500 4-Matic, 1978 450SL
Really nice job, Cristian!! Very nice photo documentation. If you don't mind, I'll place a link to your installation in my writeup of mine in the S500.
Thanks for taking the time to let the forum know. I have had questions about the SL, but like you, I know my car and not others.
I'll contact you about unlocking the V710. I got Paul's neat Mercedes logo wallpaper into it as you have (using the chip), but other things have been problematic.
Thanks for taking the time to let the forum know. I have had questions about the SL, but like you, I know my car and not others.
I'll contact you about unlocking the V710. I got Paul's neat Mercedes logo wallpaper into it as you have (using the chip), but other things have been problematic.
#28
Member
Thread Starter
Join Date: Feb 2004
Location: Los Angeles
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
2004 SL 500
Originally Posted by Skylaw
Really nice job, Cristian!! Very nice photo documentation. If you don't mind, I'll place a link to your installation in my writeup of mine in the S500.
Thanks for taking the time to let the forum know. I have had questions about the SL, but like you, I know my car and not others.
I'll contact you about unlocking the V710. I got Paul's neat Mercedes logo wallpaper into it as you have (using the chip), but other things have been problematic.
Thanks for taking the time to let the forum know. I have had questions about the SL, but like you, I know my car and not others.
I'll contact you about unlocking the V710. I got Paul's neat Mercedes logo wallpaper into it as you have (using the chip), but other things have been problematic.
#29
Super Member
Join Date: Jun 2004
Location: Ponce Puerto Rico
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
SL500 2003 previous/ E350 2007 actually
Hey Mik:
Help us to find on the net the firmware of the Mercedes Phones if you know? I really need it. And Xtianpel again exelent job, hope to do the same to my car in couple of days.
Help us to find on the net the firmware of the Mercedes Phones if you know? I really need it. And Xtianpel again exelent job, hope to do the same to my car in couple of days.
#31
Member
Join Date: Jan 2005
Location: Beverly Hills, CA
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
2003 E500, 2005 SL600
[B]Good JOB[/B]
I have to say I think the presentation was excellent and wil probably be a boon to other Mercedes owners alike. You should be commended on your install not to mention the excellent presentation. Don't be discouraged by Blue SL ( i don't think he meant anything by it, but everyone has different things that get them excited, like installing illuminated door sills...). Having said that, i think your install was a major accomplishment given the complexity of mercedes electrical systems.... Congrats again.....
#35
Newbie
Join Date: Jan 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
CLK 320 CAB -02 MB A-Klasse 140 -99
PDF instruction installation door sills
Installing the lighted door sills is similar to this procedure but goes further. You also need to remove the plastic rail along the bottom of the door aperture - this allows the old sill to be removed and the new one just slots into place. The cables are routed over the welded seam down behind the carpet and back along to area underneath the storage bins where you place the power converter and hook up to unswitched 12v, ground and you also splice into one of the cables going to the door switch which is exposed by removing the rear side panel. You pick up power using an unused fuse position in the fuseholder underneath the passenger side storage bin and run a wire across the car to supply the other side.
The worst part of all of this is getting the side panel off without breaking the clips. They slot into panel and are a press fit into the bodywork, they are difficult to remove without breaking them so I'd recommend (so would Lovin') to replace them with new ones.
I have a PDF explaining the procedure if anyone wants it. It's in German and I can help with translation if you don't speak it.
The worst part of all of this is getting the side panel off without breaking the clips. They slot into panel and are a press fit into the bodywork, they are difficult to remove without breaking them so I'd recommend (so would Lovin') to replace them with new ones.
I have a PDF explaining the procedure if anyone wants it. It's in German and I can help with translation if you don't speak it.
aggeno1@hotmail.com
thx