Does somebody know how to get rid of the "brake wear" message on a 2007 SL 550?
Subscribe
Harnischfeger
Newbie
close
Jan 28, 2013
- Join DateDec 2011
- LocationNortheast Atlanta
- Posts:8
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveSL550 (Iridium Silver, Ash interior, Panorama roof), Chevy Tahoe, Honda VTX1800R, Searay SRV240
-
Likes:0
-
Liked:0 Times in 0 Posts
Does somebody know how to get rid of the "brake wear" message on a 2007 SL 550? All four pads and sensors are brand new.
====================
Here's what does NOT work:
Reset the computer by pressing the gas pedal while key is on position
and wait 10 sec and key to off position and let go of gas pedal.
==================
Thanks in advance.
====================
Here's what does NOT work:
Reset the computer by pressing the gas pedal while key is on position
and wait 10 sec and key to off position and let go of gas pedal.
==================
Thanks in advance.
Newbie
change the sensor .. then do your reset if u have changed the sensor check for proper connection ..
Harnischfeger
Newbie
close
Jan 28, 2013
- Join DateDec 2011
- LocationNortheast Atlanta
- Posts:8
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveSL550 (Iridium Silver, Ash interior, Panorama roof), Chevy Tahoe, Honda VTX1800R, Searay SRV240
-
Likes:0
-
Liked:0 Times in 0 Posts
Replace sensors and make sure they are connected. No reset required.
