SL/R107: Lower Control Arm bushing
#1
Junior Member
Thread Starter
Lower Control Arm bushing
I was wondering does anyone have any information on the removal and installation of lower control bushings on a 87 560 sl. I have the manual on CD but everyone knows it's not very informative.
#2
There is no big secret trick as lower, or upper, are pretty straight forward. Of course you will need a coil spring compressor and you need to be damn careful removing springs but removing the old bushings should teach you how to reinstall new. Have your front end aligned after. It's also real helpful if you have a 1 inch drive socket and breaker bar!