SL55/63/65/R230 AMG: Running a 180mm crank and 83mm sc pulley sl55
Thread Starter
Junior Member
Joined: Jul 2012
Posts: 20
Likes: 0
CL55 AMG
Running a 180mm crank and 83mm sc pulley sl55
Hello
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
Last edited by mbegdouri; May 9, 2015 at 03:52 PM.
Newbie
Joined: Aug 2017
Posts: 9
Likes: 1
E55amg
Hello
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
