SLK/R170: Searched, and can't find details on code P0805
03-01-2008, 03:10 PM
#1
Almost a Member!
Thread Starter
Join Date: May 2006
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Searched, and can't find details on code P0805
Hi Guys.
1998 SLK R170 - Auto.
Just had my oil, transmission fluid, spark plugs changed yesterday.
Then check engine came on right after.
Diagnosed with code P0805 Clutch Position Sensor Circuit Malfunction.
Tried clearing it. Didn't work. It came right back on as soon as car was re-started.
Car only has 46,000 miles.
Now my car is sitting at the shop. Any inputs?
Thanks in Advance
1998 SLK R170 - Auto.
Just had my oil, transmission fluid, spark plugs changed yesterday.
Then check engine came on right after.
Diagnosed with code P0805 Clutch Position Sensor Circuit Malfunction.
Tried clearing it. Didn't work. It came right back on as soon as car was re-started.
Car only has 46,000 miles.
Now my car is sitting at the shop. Any inputs?
Thanks in Advance
03-02-2008, 11:00 AM
#2
Newbie
Join Date: Sep 2006
Location: Oklahoma City
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
98 slk230, 98 ml230, #8 #24 and #17 Nascar race cars for promotional events see my home page.
Trans code
Sounds like they knocked a connector off a solenoid, pinched a wire, or loosened wiring connector to the transmission..
03-05-2008, 10:05 PM
#3
Newbie
Join Date: Feb 2008
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
c32
This code has to do with the supercharger function. Check and see if the supercharger is operating properly. Follow step 35 of the attached file. Hope it helps. If problem still occurs, you may have to replace the control module and supercharger. You will have to have the dealer do the installation of the module if you need it due to programming that is needed. I hope it dosen't have to go that far.
