CLK Black series CF rear bumper
06-03-2008, 01:52 AM
#78
MBWorld Fanatic!
Join Date: Mar 2005
Location: sac, calif.
Posts: 1,164
Likes: 0
Received 0 Likes
on
0 Posts
'06 slk55
Didn't you own a yellow Viper before the GT3? You go through cars like tissue paper. Not that there's anything wrong with that. In fact, I'm kinda envious.
06-03-2008, 11:52 AM
#79
Former Vendor of MBWorld
I need to wait till about thursday or Friday. If i don't have carbon pics then. I can show you what we have in fiberglass. Is the picture above the Vaeth? I never seen that. Although i don't quite get it, why does it look like it needs to be bolted together? I suppose you can say ours is a similar shape, only ours is bolted together? LOL Also, ours continues and the fins keep going down to where the spare tire is. Keep in mind, not only is ours a part for looks, we have also sent it out for a week to a wind tunnel testing facility on a mock up car. This diffuser fixes some of the drag the stock car has with air getting trapped on the inside of the rear bumper, also it provides a little downforce.
06-03-2008, 11:55 AM
#80
Former Vendor of MBWorld
06-03-2008, 02:15 PM
#81
MBWorld Fanatic!
Join Date: Apr 2005
Location: Bay Area
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
'10 Porsche Turbo PDK, 500e, GL450
Thanks!
Jesse,
I need to wait till about thursday or Friday. If i don't have carbon pics then. I can show you what we have in fiberglass. Is the picture above the Vaeth? I never seen that. Although i don't quite get it, why does it look like it needs to be bolted together? I suppose you can say ours is a similar shape, only ours is bolted together? LOL Also, ours continues and the fins keep going down to where the spare tire is. Keep in mind, not only is ours a part for looks, we have also sent it out for a week to a wind tunnel testing facility on a mock up car. This diffuser fixes some of the drag the stock car has with air getting trapped on the inside of the rear bumper, also it provides a little downforce.
I need to wait till about thursday or Friday. If i don't have carbon pics then. I can show you what we have in fiberglass. Is the picture above the Vaeth? I never seen that. Although i don't quite get it, why does it look like it needs to be bolted together? I suppose you can say ours is a similar shape, only ours is bolted together? LOL Also, ours continues and the fins keep going down to where the spare tire is. Keep in mind, not only is ours a part for looks, we have also sent it out for a week to a wind tunnel testing facility on a mock up car. This diffuser fixes some of the drag the stock car has with air getting trapped on the inside of the rear bumper, also it provides a little downforce.
06-03-2008, 02:55 PM
#82
Super Member
Join Date: Sep 2006
Location: Bay Area/ NY
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
07 SLK55, 08 R32
Jesse,
I need to wait till about thursday or Friday. If i don't have carbon pics then. I can show you what we have in fiberglass. Is the picture above the Vaeth? I never seen that. Although i don't quite get it, why does it look like it needs to be bolted together? I suppose you can say ours is a similar shape, only ours is bolted together? LOL Also, ours continues and the fins keep going down to where the spare tire is. Keep in mind, not only is ours a part for looks, we have also sent it out for a week to a wind tunnel testing facility on a mock up car. This diffuser fixes some of the drag the stock car has with air getting trapped on the inside of the rear bumper, also it provides a little downforce.
I need to wait till about thursday or Friday. If i don't have carbon pics then. I can show you what we have in fiberglass. Is the picture above the Vaeth? I never seen that. Although i don't quite get it, why does it look like it needs to be bolted together? I suppose you can say ours is a similar shape, only ours is bolted together? LOL Also, ours continues and the fins keep going down to where the spare tire is. Keep in mind, not only is ours a part for looks, we have also sent it out for a week to a wind tunnel testing facility on a mock up car. This diffuser fixes some of the drag the stock car has with air getting trapped on the inside of the rear bumper, also it provides a little downforce.
06-03-2008, 04:31 PM
#83
Former Vendor of MBWorld
06-03-2008, 08:05 PM
#84
06-03-2008, 08:09 PM
#85
06-03-2008, 08:26 PM
#86
MBWorld Fanatic!
Join Date: Apr 2005
Location: Bay Area
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
'10 Porsche Turbo PDK, 500e, GL450
06-06-2008, 06:29 PM
#89
Former Vendor of MBWorld
As promised. I will post some pictures of the work in progress. This is when it was being test fit on Alex's car. It was not yet attached to the car, infact it was only held up by a jack stand. Also, it is in fiberglass, finished part will only be available in carbon fiber. The diffuser is done. It has already even been tested. The mold is now done. But needs to be tweaked a little bit now to make sure it will be a snug fit. The final parts will be for sale in the next few weeks in carbon fiber. Sorry for the bad pics, they were all taken with my cell phone. But i figured its better then nothing.
Thanks to Alex for letting us borrow his car for a few months. Also, as you see, his rear spoiler is off because that to will be available in carbon fiber.
Thanks to Alex for letting us borrow his car for a few months. Also, as you see, his rear spoiler is off because that to will be available in carbon fiber.
Last edited by BlackC230Coupe; 06-06-2008 at 06:31 PM.
06-06-2008, 06:38 PM
#90
MBWorld Fanatic!
Join Date: Apr 2005
Location: Bay Area
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
'10 Porsche Turbo PDK, 500e, GL450
awesome
You got yourself another customer.
Heh heh Already called neil ... and he has my name and number!
Just further info for others. The CF rear spoiler is an exact replica of the AMG spoiler.
Estimated time of deliver for first batch is approx 4 weeks.
I can't wait to get mine installed. I think it will looks absolutely stunning on a silver car.
Heh heh Already called neil ... and he has my name and number!
Just further info for others. The CF rear spoiler is an exact replica of the AMG spoiler.
Estimated time of deliver for first batch is approx 4 weeks.
I can't wait to get mine installed. I think it will looks absolutely stunning on a silver car.
Last edited by SLK55R; 06-06-2008 at 06:50 PM.
06-06-2008, 09:08 PM
#91
MBWorld Fanatic!
Join Date: Sep 2006
Location: Miami, FL
Posts: 1,049
Likes: 0
Received 1 Like
on
1 Post
Lotus Elise SLK55
As promised. I will post some pictures of the work in progress. This is when it was being test fit on Alex's car. It was not yet attached to the car, infact it was only held up by a jack stand. Also, it is in fiberglass, finished part will only be available in carbon fiber. The diffuser is done. It has already even been tested. The mold is now done. But needs to be tweaked a little bit now to make sure it will be a snug fit. The final parts will be for sale in the next few weeks in carbon fiber. Sorry for the bad pics, they were all taken with my cell phone. But i figured its better then nothing.
Thanks to Alex for letting us borrow his car for a few months. Also, as you see, his rear spoiler is off because that to will be available in carbon fiber.
Thanks to Alex for letting us borrow his car for a few months. Also, as you see, his rear spoiler is off because that to will be available in carbon fiber.
No problem man, that diffuser looks great! I can't wait to be the first one to test it out
! Just let me know when you want me to bring the car!
06-10-2008, 02:18 PM
#98
Junior Member
Join Date: Jun 2007
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
slk55amg
Hi....
What about creating an outline around the tail pipes .KInd of a frame.
http://www.dieselstation.com/wallpap...screen-028.jpg
What about creating an outline around the tail pipes .KInd of a frame.
http://www.dieselstation.com/wallpap...screen-028.jpg
06-10-2008, 02:39 PM
#100
Super Member
Join Date: Sep 2006
Location: Bay Area/ NY
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
07 SLK55, 08 R32
Hi....
What about creating an outline around the tail pipes .KInd of a frame.
http://www.dieselstation.com/wallpap...screen-028.jpg
What about creating an outline around the tail pipes .KInd of a frame.
http://www.dieselstation.com/wallpap...screen-028.jpg
