Mark this thread as Unsold
FS: Chicago C32 front Rotors never mounted/zinc coating scratched
Thread Starter
Junior Member
Joined: Aug 2008
Posts: 30
Likes: 0
c32
FS: Chicago C32 front Rotors never mounted/zinc coating scratched
2002 c32 front rotors:
I purchased a new set of rotors a while back and the zinc coating was scratched off in a few places and I had them ship me out a new set. After I sold the car, I realized I still had these waiting in my garage. They have been stored flat, wrapped in a shipping box since then. When I opened them up for pictures for the ad, there was a small surface rust spot were the zinc coating was rubbed off during shipping on the edge. I hit that spot with a bit of steel wool and it knocked it off with little effort. Most of the scratches in the zinc coating are just enough to catch a fingernail on. Once the bedding process is done all the rest of the coating will be removed. The original sku number was N1000-140993 and the part number on the label of each of the rotors is 203 421 09 12. I do not recall if these were the Zimmerman or Pilenga rotors, and I did not see any obvious casting marks.
New they were around $125 each. Asking $125 for both. local pick up preferred, as the weight is around 54lbs according to my original receipt. Let me know if there are any questions and thanks for looking.
I purchased a new set of rotors a while back and the zinc coating was scratched off in a few places and I had them ship me out a new set. After I sold the car, I realized I still had these waiting in my garage. They have been stored flat, wrapped in a shipping box since then. When I opened them up for pictures for the ad, there was a small surface rust spot were the zinc coating was rubbed off during shipping on the edge. I hit that spot with a bit of steel wool and it knocked it off with little effort. Most of the scratches in the zinc coating are just enough to catch a fingernail on. Once the bedding process is done all the rest of the coating will be removed. The original sku number was N1000-140993 and the part number on the label of each of the rotors is 203 421 09 12. I do not recall if these were the Zimmerman or Pilenga rotors, and I did not see any obvious casting marks.
New they were around $125 each. Asking $125 for both. local pick up preferred, as the weight is around 54lbs according to my original receipt. Let me know if there are any questions and thanks for looking.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
