Mark this thread as Unsold
Rebuilt C32 front calipers
#1
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
190e 2.3 16v
Rebuilt C32 front calipers
I have a pair of black rebuilt C32 front calipers with new retaining kit. Originally purchased for a 2.3 16v, but there is too much work to get them on.
![](http://i257.photobucket.com/albums/hh231/Sheng1314/amgcalipers.jpg)
![](http://i257.photobucket.com/albums/hh231/Sheng1314/IMG_20120414_180831.jpg)
![](http://i257.photobucket.com/albums/hh231/Sheng1314/IMG_20120414_180853.jpg)
the part numbers are
20 7047 03
20 7915 02
selling for $400 shipped from Toronto, Canada.
I'm not on Mbworld much, but I am more active on
190rev.net
also I have some feed back on ebay user name "Sheng-young"
and redflagdeals (local forum), user name "Sheng"
![](http://i257.photobucket.com/albums/hh231/Sheng1314/amgcalipers.jpg)
![](http://i257.photobucket.com/albums/hh231/Sheng1314/IMG_20120414_180831.jpg)
![](http://i257.photobucket.com/albums/hh231/Sheng1314/IMG_20120414_180853.jpg)
the part numbers are
20 7047 03
20 7915 02
selling for $400 shipped from Toronto, Canada.
I'm not on Mbworld much, but I am more active on
190rev.net
also I have some feed back on ebay user name "Sheng-young"
and redflagdeals (local forum), user name "Sheng"
#3
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
190e 2.3 16v
I'm not sure which data base, but when I did a quick search for 20 7047, I came to this mbworld thread.
http://www.www.mbworld.org/forums/su...7047-04-a.html
Although initially mentioned it was a cl600, another mentions that it is very similar to his c32 calipers, as it's the same as his car. Also it runs the 345mm rotor which is the same as the C32.
The person I purchased them from also mentioned that they were c32 calipers.
http://www.www.mbworld.org/forums/su...7047-04-a.html
Although initially mentioned it was a cl600, another mentions that it is very similar to his c32 calipers, as it's the same as his car. Also it runs the 345mm rotor which is the same as the C32.
The person I purchased them from also mentioned that they were c32 calipers.
Last edited by Sheng; 04-17-2012 at 01:32 AM.
#6
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
190e 2.3 16v
Sorry if that was confusing, according to one post, a member with a c32 stated, it was like his. The person who I purchased the calipers from also says it is the c32 calipers.
#7
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
190e 2.3 16v
If it would help, I could use a measuring tape to take measurements of specific parts. I don't have a database unfortunately so if you could provide measurements that will determine the authenticity, I'll measure them.