Need help WEBASTO
04-18-2019, 10:31 AM
#1
Newbie
Thread Starter
Join Date: Sep 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
E250 4Matic
Need help WEBASTO
I have an issue with my 2012 E250 CDI diesel Webasto.
After replacing the water pump to the engine I filled coolant up to the specification. After starting the engine I let it run for a while. Then I started Webasto. It starts OK but after a approx 20 seconds it cuts off the burner and lets only the fan and water pump run a while. then it shuts off. After three attempts I got a message to the car's infoscreen that heater is on off mode and I should contact service. Last time in 2016 i contacted service and they changed the whole unit that caused me a bill of $3 010.
I would be happy to avoid this happen one more time.
Could anyone help me please?
How to "reboot" the system and get ait off from the circulation pump?
Cheers!
//J
After replacing the water pump to the engine I filled coolant up to the specification. After starting the engine I let it run for a while. Then I started Webasto. It starts OK but after a approx 20 seconds it cuts off the burner and lets only the fan and water pump run a while. then it shuts off. After three attempts I got a message to the car's infoscreen that heater is on off mode and I should contact service. Last time in 2016 i contacted service and they changed the whole unit that caused me a bill of $3 010.
I would be happy to avoid this happen one more time.
Could anyone help me please?
How to "reboot" the system and get ait off from the circulation pump?
Cheers!
//J
