Vito w447 intelligent light system install
#1
Vito w447 intelligent light system install
Hi everyone new member here, had a good look on the forums but can’t seem to find the answer, I have a 2017 Vito w447 and have been offered a complete set of intelligent lights with ballasts and control modules attached, will these be a straight plug and play swap or will I have fault codes popping up, already upgraded the rears with no problems. Thanks in advance any help appreciated.
#2
Retrofit
Hello mate,
did you manage to do the operation?
from the information I found on the internet it seems that they only need to be activated from the car software.
I would like to do this operation too, if you have any news, please help me.
thank you
did you manage to do the operation?
from the information I found on the internet it seems that they only need to be activated from the car software.
I would like to do this operation too, if you have any news, please help me.
thank you
#3
#4
unfortunately, this isn't plug & play swap. As far i know to get this done the right way u will need the correct wiring loom for the headlights/ complete headlights setup/ rear self-levelling sensors. There's one person who done this swap and cost him over 2.5k and a lot of work. Not 100% sure but u may need SAM module too.
You are better off getting LEd headlights from Aliexpress for around 800quid. Less hassle and good quality. Quite few people done this already and they are happy
You are better off getting LEd headlights from Aliexpress for around 800quid. Less hassle and good quality. Quite few people done this already and they are happy
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)