AZNOptics.com Auto Lighting Storefront
#26
Hi
I was waiting till some bulbs blew on my eyebrow lights on the wifes 2009 C300 4 matic before replacing them with some leds
It's soon to have a 6000k low beam hid fitted soon if that makes any difference?
What led's do you recommend for the eyebrow lights, are these error free simple push ins and with christmas coming up whats your delivery timescale like?
Thanks
I was waiting till some bulbs blew on my eyebrow lights on the wifes 2009 C300 4 matic before replacing them with some leds
It's soon to have a 6000k low beam hid fitted soon if that makes any difference?
What led's do you recommend for the eyebrow lights, are these error free simple push ins and with christmas coming up whats your delivery timescale like?
Thanks
#27
SPONSOR/MBworld Guru
Thread Starter
Hi
I was waiting till some bulbs blew on my eyebrow lights on the wifes 2009 C300 4 matic before replacing them with some leds
It's soon to have a 6000k low beam hid fitted soon if that makes any difference?
What led's do you recommend for the eyebrow lights, are these error free simple push ins and with christmas coming up whats your delivery timescale like?
Thanks
I was waiting till some bulbs blew on my eyebrow lights on the wifes 2009 C300 4 matic before replacing them with some leds
It's soon to have a 6000k low beam hid fitted soon if that makes any difference?
What led's do you recommend for the eyebrow lights, are these error free simple push ins and with christmas coming up whats your delivery timescale like?
Thanks
Personally, I'd wait till your HIDs are installed to see which would work out best for you as HIDs are a kelvin range and not precise and color does vary manufacturer to manufacturer. Generally, if you see any hint of blue at all, go 8000K, but if not, then 5000K.
#29
SPONSOR/MBworld Guru
Thread Starter
Purchase through our website uses google checkout. If you want to pay via Paypal, you can PM me your paypal email address and I will send you an invoice.
#31
SPONSOR/MBworld Guru
Thread Starter
#32
Thanks for the reply, I didn't mind paying a bit extra to avoid anything g related, The eyebow leds arrived today and will fit them over the weekend.
I havn't purchased my hids yet and to be honest it's because I am unsure as to wether 5k or 6k is best whats your opinion?
I understand you do 5k hid kits but numbers are limited?
I havn't purchased my hids yet and to be honest it's because I am unsure as to wether 5k or 6k is best whats your opinion?
I understand you do 5k hid kits but numbers are limited?
#33
SPONSOR/MBworld Guru
Thread Starter
We're actually out of the HID business now due to increased regulations by DOT and US Customs making it illegal to import aftermarket HIDs and subject to seizure and fines. We've already had a couple freight shipments seized due to this so exited the market.
#34
Okay got them and had time to fit them tonight
Super shineeeeee although..having hands the size of shovels made the drivers side very frustrating. I now know why ex girlfriends said..use anything you want but not the hands
Thanks again, feedback left
Super shineeeeee although..having hands the size of shovels made the drivers side very frustrating. I now know why ex girlfriends said..use anything you want but not the hands
Thanks again, feedback left
#36
SPONSOR/MBworld Guru
Thread Starter
Did you know AZN Optics also provides household LED lighting solutions too?
1102.6 Lumens at only 10 watts!
http://www.aznoptics.com/index.php?m...products_id=78
1102.6 Lumens at only 10 watts!
http://www.aznoptics.com/index.php?m...products_id=78
#37
SPONSOR/MBworld Guru
Thread Starter
As you all know, AZN Optics is always looking out for new innovations and designs in the market to bring you the best option available for your w204. We've just released a spin off our older V2 model which we're calling V4. This design incorporates a capacitor to help regulate power as well as a physical cut PCB to help reduce heat transfer to more delicate diode components. Few other component improvements as well.
Last edited by AZN Optics; 07-11-2014 at 01:52 PM.
#38
SPONSOR/MBworld Guru
Thread Starter
Formally announcing that all our V3 units have not been adapted with Gel Packs. This is a high temp resistant gel substrate that we've applied to the resistor and critical solder joint to both help encapsulate the heat and insulate against heat soak, making these units more durable against heat and electrical surge related incidents.
#39
SPONSOR/MBworld Guru
Thread Starter
bump. We'll be introducing a new line of H7 and H11 plasma LEDs in the next few weeks. These would be ideal for fog lights if you don't want to upgrade to HIDs. Package will be put together with big Morimoto load resistors.
#41
SPONSOR/MBworld Guru
Thread Starter
New V5 design of our 194 wedge unit is now available. These utilize cooler burning COB based diodes matched with our surge protection circuitry from our V4 line.
Offered in 4300K (matches better with OEM halogen and older HIDs) and 5000K (pure white)
4300K: http://www.aznoptics.com/index.php?m...products_id=96
5000K: http://www.aznoptics.com/index.php?m...products_id=95
Offered in 4300K (matches better with OEM halogen and older HIDs) and 5000K (pure white)
4300K: http://www.aznoptics.com/index.php?m...products_id=96
5000K: http://www.aznoptics.com/index.php?m...products_id=95
#42
SPONSOR/MBworld Guru
Thread Starter
AZN Optics is now offering next generation Morimoto XB35 HID conversion kits. Available for order on our site www.aznoptics.com or PM us for more details.
#44
SPONSOR/MBworld Guru
Thread Starter
Sharing a pic provided by one of our customers of our new V5 194 wedge LEDs and the level of brightness the new design has with just the city lights by themselves.
#46
SPONSOR/MBworld Guru
Thread Starter
bump
Working on adapting our V5 design to festoon models which should be available January.
Working on adapting our V5 design to festoon models which should be available January.
#48
SPONSOR/MBworld Guru
Thread Starter
Have halogen reflectors and don't want to blind oncoming traffic with an HID conversion? Good call! We also carry full line of Morimoto Bi-Xenon projector retrofit kits from FX-R stage III and IV to Morimoto Mini Stage III!