Brabus monoblock IV wheels on w210 E55?

Apr 4, 2010 | 05:31 PM

greghaz

Thread Starter

Junior Member

Joined: Jan 2010

Posts: 41

Likes: 0

From: Oregon

'01 E55, '95 Montero, '73 Bavaria, '70 Karmann Ghia vert

Brabus monoblock IV wheels on w210 E55?

Greetings,

I have a stock '01 w210 E55.
I am looking at a set of Brabus 18 x 8.5, et35 monoblock IV wheels.
I know this will leave me with a non-staggered setup and am OK with that.

My questions are:
- Will a front et of 35 be a problem when factory recommended et is 31?
- Will the front width of 8.5" be a problem when the factory recommended width is 8"?
- If spacers are required should that cause me to reconsider buying these wheels?
- Is lug size (diameter, length) an issue?

Many thanks
Greg

Apr 5, 2010 | 01:44 AM

MBFLO

MBWorld Fanatic!

Joined: Jan 2010

Posts: 1,073

Likes: 0

From: MICHIGAN

2001 E55 - 2008 CLS63 -2016 F-150

I think you should be allright ..you might need spacers , and make sure you get right lugs because the stock ones might not work with the new set of wheels

Jun 22, 2011 | 02:01 PM

albertdchan

Newbie

Joined: Jan 2010

Posts: 4

Likes: 0

1996 w210 e320 m104 4spd auto california car 220k as of 2/2011

brabus monoblock iv

Hi. Saw your old post. I have 3 of these wheels (1 piece). there is a fair amt of curb rash. You could use 2 for front wheels, 1 as a spare; then look for 18 x 9 or 9.5 for the rears and preserve your staggered setup. 8.5 width should not be a problem as they fit my e320 fine without even rolling fenders (though I'm running 235's instead of the amg 245's). 1 of 3 tires is good (about 40%; your future spare)

Alternatively, if you happen to know where to find 1 or 2 of these, I'd be interested.

thx
albert

Quote:

Originally Posted by greghaz

Reply Subscribe