non staggared
Thread Starter
Member
Joined: Dec 2010
Posts: 103
Likes: 0
From: watertown CT
2000 E55
non staggered
hi all i am interested in A NICE SET OF brabus reps that are all the same size 19 x 9.5 at a 38mm offset and bore is 66.56 now i know these would fit nice in the back but how about the front, anybody run even size wheels on these cars and if so will i have any problems like lights coming on... ?????
Last edited by vincentie; Jan 23, 2011 at 01:13 PM.
Senior Member
Joined: Oct 2006
Posts: 341
Likes: 0
From: Novato, California
2000 E55 AMG
They will not fit. W210 E55 OEM Front rim is 18X8; ET31. And, those barely fit. A 9.5 rim with a ET38 will rub suspension components once you mount a tire. Take a look at your front wheel. There is a suspension nut at about eleven o'clock that allows for about an 1/8th inch gap between the nut and the tire. Very close. 
Thread Starter
Member
Joined: Dec 2010
Posts: 103
Likes: 0
From: watertown CT
2000 E55
They will not fit. W210 E55 OEM Front rim is 18X8; ET31. And, those barely fit. A 9.5 rim with a ET38 will rub suspension components once you mount a tire. Take a look at your front wheel. There is a suspension nut at about eleven o'clock that allows for about an 1/8th inch gap between the nut and the tire. Very close.
So a 8.5 wide with like a 35mm off set wont work either? I thought i seen a bunch of these with a 8.5 wheel up front....At least i thought i did!!!
MBWorld Fanatic!
Joined: Aug 2003
Posts: 8,882
Likes: 1,214
From: In my garage
E55, GLS450, GL63, GLE350
Senior Member
Joined: Oct 2006
Posts: 341
Likes: 0
From: Novato, California
2000 E55 AMG
FYI, my current setup is 18X8; 30ET F + 18X9; 35ET R.
