Don Nguyen

For this new white Mercedes Benz CLS550 sedan, I vinyl wrapped the tail lights with my light tint/smoke film material. On this car, I we decided to do the whole tail light. I didn't take pictures of it before, but the first picture does show the driver side as tinted/smoked (left) and the passenger (right) untinted. The lighting of it inside kind of makes it hard to gauge, but in the other pictures where I took them outside will help you better see the differences. As you can notice, as the lighting changes, the appearance of the darkness of the shade changes as well.









-Don Nguyen

Donathon@gmail.com

Don Nguyen

Here is a white VW Mk6 that had me vinyl wrap the roof of his car with the 3M dinoc matte carbon fiber vinyl. I wrapped the material around the antenna and did the top rear hatch part as well. The carbon look adds a nice touch to the car. The owner of this car drove out to me in Anaheim Hills / Orange County to have the work done. I took a picture of the side of the roof where the material end, since people usually ask what it looks like for cars that do not have rails/etc.





















-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this car had me black out the chrome/brushed aluminum window trim on his brand new white Mercedes Benz E350. We went with the matte black finish for around the window trim area. In addition to the window trim, he also had me wrap the middle center section of his front bumper in my gloss black vinyl material. He drove out to me in Anaheim Hills/Orange County to have the vinyl work done.

Before:






After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

Here is an example of a stock white Mercedes Benz C300 sedan that came in to have me vinyl their roof in my gloss black vinyl material. Even though the owner of this car was going to leave his car relatively stock, the black roof was still a nice addition to the car, which gave it an OEM+ look. The owner of this car drove out to me in Orange County / Anaheim Hills to get the vinyl work done. The only thing I would have suggested him to also get done was to black out the chrome window trim around the doors and the chrome trunk handle piece in the back. That would have really set the car off fairly nicely.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this brand new white VW TDI wagon brought his car by to have me lightly tint / smoke the tail lights and third brake light on his car. I took some pictures from side to side, showing how the tint looks like in directly sunlight and in some shade. As you can see, it's fairly dynamic and changes depending on the lighting. I haven't had anyone have any issues with this shade though, as far as light output or having any issues with law authorities though, so that is a plus. The owner of this car I believe was from around Pasadena and drove out to me in Anaheim Hills / Orange County to get the work done.

Before:




During (driver/left side tinted, passenger/right side stock) -




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

I've had a couple of people ask me to post some more pictures of the 3M 1080 gloss carbon fiber finish, so here is a white Lexus IS350 sedan that I vinyl wrapped the roof with in that material. Also note, the roof spoiler is a real carbon piece, so this will also help give those an idea of how the vinyl material compares/contrast against real carbon. The owner of this car drove out to me in Anaheim Hills / Orange County to get the work done. We went with the 3M 1080 gloss carbon fiber vinyl finish over the 3M di-noc matte carbon fiber finish to closer match real cf and go with his roof spoiler better.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

People usually ask me if they should go with gloss black or matte black for the window trim on their black cars, so here is an example of matte black on this brand new BMW F10 sapphire metallic 5 series sedan. With the black wheels on the car, it made the chrome window trim stand out even more. So you can see the differences of the before and after are quite drastic, even for such a small detail. The owner of this car was also around/from Orange County and drove out to my shop in Anaheim Hills. I liked the end results and how this car turned out with the black vinyl trim.

Before:




After:










-Don Nguyen

donathon@gmail.com

Don Nguyen

Tinted / smoked the center clear portion of the tail lights on this brand new white Mercedes E350 sedan. In addition to tinting the tail lights with my light film material, I also wrapped the trunk spoiler in the 3M 1080 gloss carbon fiber material and blacked out the chrome trunk handle with my matte black vinyl material. Overall, the light shade of tint was a nice slight change in the look of the car, without making it too dark and is still visible during the day/night.

Most spoilers aren't practical to wrap, but this one happen to work out.

Before:




Driver side tinted/smoked - passenger side stock:


After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

I thought I had taken more pictures of this car, but three is all I have I suppose. This is a car that I did for Hyundai for last year's SEMA, just to give you an idea of how some old some of my pictures can be or take before getting uploaded. They wanted to do a real carbon roof, but did not have enough time to do it before SEMA, so having me vinyl wrap it with the 3M dinoc matte carbon fiber vinyl material was the next alternative. I wrapped both the painted and glass part that's on the Veloster.







-Don Nguyen

donathon@gmail.com

Don Nguyen

I have had a lot of people ask me how vinyl looks when covered over damaged paint or paint with clear coat failure. Here is the best example I could find at the moment in my picture data base. The owner of this blue Honda Civic coupe had me vinyl wrap the roof of their car with my gloss black vinyl material. As you can see in the before pictures, you can see that basically the entire roof was having clear coat failure. It is somewhat hard to see in the after pictures versus how it looks like in person. However, in one of the pictures I put a red box around the area that you can see how the uneveness resulting from the clear coat failure does show through the vinyl a bit still. Even though this is not a perfect solution to peeling/failing paint, it is still better than what was there before and will prevent further paint damage from the sun, etc.

Before:






After:










-Don Nguyen

donathon@gmail.comf

benzokirk

"Most spoilers aren't practical to wrap, but this one happen to work out."
[/QUOTE]

have you ever carbon fiber wrapped a trunk spoiler for a 210 E55 AMG before? That's what I'min the market for, if you haven't done it before and care to take on the challenge.

Don Nguyen

Would you be shipping it to me in California?

benzokirk

I would, but I'd have to source one first, unless you can help me find one that's similar to the one in your post that would fit a 210...

Don Nguyen

For this car, I blacked out the chrome brushed aluminum window trim on the car with my black vinyl material and also lightly tinted / smoked the tail lights for this black Mercedes Benz C300 sedan. The owner of this car drove out to me in Orange County / Anaheim Hills to get the vinyl work done. We decided to go with the matte black finish to give the car some contrast still, over the gloss black vinyl finish for the window trim. Also, for the tail lights, we also went with the clear portion cut out to give it a little bit more of a contrast as well.

Before:




After:












Before:


After:




-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this black VW Passat drove out to me in Orange County / Anaheim Hills from Los Angeles county to get some vinyl work done. He wanted me to black out the chrome / brushed aluminum around his windows and to also lightly tint his tail lights. The pictures may seem over exposed in some of them, but I did that on purpose, as to capture how the tail lights looked at those exact moments and in those lighting conditions. For the window trim, we went with my matte black vinyl material.

Before:











After (note - far right tail light piece is not tinted, but the other 3 to the left of it are):












-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this black VW Passat drove out to me in Orange County / Anaheim Hills from Los Angeles county to get some vinyl work done. He wanted me to black out the chrome / brushed aluminum around his windows and to also lightly tint his tail lights. The pictures may seem over exposed in some of them, but I did that on purpose, as to capture how the tail lights looked at those exact moments and in those lighting conditions. For the window trim, we went with my matte black vinyl material.

Before:











After (note - far right tail light piece is not tinted, but the other 3 to the left of it are):












-Don Nguyen

donathon@gmail.com

Don Nguyen

I know this isn't for most people, but the owner of this silver Nissan 350z approached me with the idea of wrapping basically the top half of his car in the 1080 3M gloss carbon fiber vinyl material. It's definitely going to be different from just getting the roof top wrapped and that's what the owner of this car wanted. I tried to take multiple pictures of the car from various angles to show how the weave and pattern looks like in different lighting/angles. I've seen this done with cars in different colors (such as black, etc), but not with carbon before. I also tinted his head lights and tail lights, but these pictures are a bit old, and it was of a darker shade that I no longer use. The owner of this car was around Orange County as well and came to me in Anaheim Hills to get the work done.

















-Don Nguyen

donathon@gmail.com

Don Nguyen

Here are some pictures of a black Mercedes Benz E63 AMG that I did on my most recent trip up to norcal / bay area. The owner of this car had me vinyl wrap the chrome / brushed aluminum trim on his car with my matte black vinyl material. I believe he originally was going to have me tint his lights as well, but he went ahead and had them painted instead before I made my trip up there. Unfortunately, he got pulled over the the tails being too dark. The advantage of vinyl in this case would have been that it would have been easy to reverse/pull off the tint film material and go back to stock if needed.

I didn't take any before pictures, as I didn't have much time between cars, so I only took pictures of the after results.









-Don Nguyen

donathon@gmail.com

Don Nguyen

The owner of this dark blue Subaru WRX hatchback wanted me to red out his tail lights, to make it not so white/clear. So what I did for him was use my clear red vinyl film and applied it over his rear tail lights. He wanted me to cut out the reverse light and turn signal portions so that they would show through their original colors still. However, I took in progress pictures to show you guys how it would have looked like if they weren't cut out, so you can compare and contrast which style/look you'd prefer more.

Before:


In progress/during




After:








-Don Nguyen

donathon@gmail.com

Don Nguyen

For this white Lexus IS250, the owner wanted to have me black out the roof of his car with my gloss black vinyl material. We went with the gloss black to give it that panoramic/glass look. The gloss black roof went well with the other black pieces that were on the car (black inserts/accents on the side skirts and roof spoiler, which was only taken off for the install). The only other thing I could have possibly suggested to doing to this car is also blacking out the chrome around the window trim area. However, that comes down to a preference thing and some people prefer having/leaving it chrome, but I like the blacked out look for the chrome since it gives the car a much sportier look. The owner of this car came out to me in Orange County/Anaheim Hills to get the work done.

Before:




After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

This is another car that I worked on during one of my trips up to norcal/bay area to do vinyl wraps. I really like the way this car turned out. It's not often that a black car has me vinyl wrap their roof, but the owner of this black Mercedes Benz E55 AMG had me vinyl wrap his roof with the 3M di-noc matte carbon fiber finish vinyl material. The final result and effect is as you can see below. The matte/carbon finish roof really gives the car some more character in my opinion.











-Don Nguyen

donathon@gmail.com

Don Nguyen

For this brand new black BMW F10 5 series, I blacked out the chrome/brushed aluminum window trim with my gloss black vinyl material. The owner of this car opted to go with the gloss black finish over the matte black to give it the look of the original BMW shadow line blacked out window trim that comes from the factory. Overall, I think it changed the look of the car dramatically, even for something as small/simple as just the chrome trimming around the windows. The owner of this car drove out to me in Orange County/Anaheim Hills to get the vinyl work done.













-Don Nguyen

donathon@gmail.com

Don Nguyen

This brand new white F30 335i sedan came in to have me vinyl wrap the roof of his car with my gloss black vinyl material. He also wanted me to black out the lower sides of his front bumper, where splitters would typically go, with the same finish. He drove out to me in Orange County/Anaheim Hills to have the work done.

Before:




After:












-Don Nguyen

donathon@gmail.com

Don Nguyen

Here is a car that I worked on during my norcal/bay area trip in San Jose. The owner of this car wanted to go with the 3M dinoc matte carbon fiber vinyl for his roof. As you can see, the material looks different from different angles. I tried taking it from multiple perspectives/angles to show you guys this effect. The carbon roof definitely gave this car a more aggressive look and I thought it went fairly well with the rest of the theme of the car.











-Don Nguyen

donathon@gmail.com

Don Nguyen

I worked on this blue VW R32 MkV while up in norcal/bay area. For this car, I used my light smoke/tint film material on the car's tail lights. I took some before, during, and after pictures to show you guys the progression and how it compares to stock side by side. Overall, the shade of vinyl that I use is fairly light and gives the car that OEM+ look without being/looking too dark.

Before:




During (driver/left side stock - passenger/ride side smoked)




After:






-Don Nguyen

donathon@gmail.com