Cooling with meth injection
04-26-2006, 09:53 PM
#1
Super Member
Thread Starter
Join Date: Dec 2005
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Cooling with meth injection
I was speaking to a few gear head regarding the i/c heating problem that us E55 guys are experiencing........They looked at the car,and thinks that maybe a meth injection system may help. Has anyone on this thread ever think about doing this,or know of any known drawback to this application.It is said that this will help the cooling,along with a boost in horsepower.
04-27-2006, 10:50 AM
#2
Super Member
Join Date: May 2005
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
06 E-55-95-F355S- 99 Porsche 911 C2 w mods
Meth injection is a very good way to combat detonation and has better properties than water. Not only does it cool, but it actually aids in helping combustion.
The drawback is that meth is a highly corrosive compound and needs a completely standalone injection system, along with stainless steel lines, and its own holding tank.
Then you have to source the meth and tuning it takes some time as well. The upside is that with a fully sorted out system you will see some huge gains and a drastic reduction in cylinder temperatures. If you do it keep us posted.
The drawback is that meth is a highly corrosive compound and needs a completely standalone injection system, along with stainless steel lines, and its own holding tank.
Then you have to source the meth and tuning it takes some time as well. The upside is that with a fully sorted out system you will see some huge gains and a drastic reduction in cylinder temperatures. If you do it keep us posted.
