custom headers & exhaust (pics)
11-03-2006, 11:03 AM
#26
MBWorld Fanatic!
Thread Starter
480hp/516tq at the wheels on a dynojet.
there's probably another few hp and 40lb/ft of tq still on the table with the proper afr and starting the run a 2k rpms.
11-04-2006, 01:42 AM
#29
MBWorld Fanatic!
Thread Starter
i finally got some 1/4mile times tonight. this was a last minute thing at firebird raceway in phoenix (elev. 1,243ft) so there was no prep, street tires at 36psi, no ice for the s/c, temp 74f, a near full tank of 91 that was topped off at the track with 3 gallons of vp.
et: 11.90
60ft: 1.77
mph: 116.83
i did have a couple of passes at 118mph but 60ft times weren't as good so et suffered. traction was hit or miss...punch and pray. very first run was with no burnout and esp on at 12.3 @ 117, the rest were with esp off and 1-2 second burnouts. most times were 11.9's with one 12.0 ranging from 116 to 118mph.
et: 11.90
60ft: 1.77
mph: 116.83
i did have a couple of passes at 118mph but 60ft times weren't as good so et suffered. traction was hit or miss...punch and pray. very first run was with no burnout and esp on at 12.3 @ 117, the rest were with esp off and 1-2 second burnouts. most times were 11.9's with one 12.0 ranging from 116 to 118mph.
Last edited by chiromikey; 11-04-2006 at 02:07 AM.
11-04-2006, 05:45 AM
#31
MBWorld Fanatic!
Any cel lights ? If you can "mass" produce these you will sell bundles ... I am in for one ...
What other mods you got ?
What other mods you got ?
Last edited by stevebez; 11-04-2006 at 05:49 AM.
11-04-2006, 10:58 AM
#33
MBWorld Fanatic!
Thread Starter
it will throw a cel even with the o2 sensors relocated but the secondary o2 sensor cel was programmed out with k2 software.
11-04-2006, 11:00 AM
#34
MBWorld Fanatic!
Thread Starter
12-12-2006, 08:44 PM
#37
MBWorld Fanatic!
Thread Starter
