KLEEMANN TB Kit
Thread Starter
MBWorld Fanatic!
Joined: Apr 2005
Posts: 2,731
Likes: 3
From: Sin City
12' C63 P31, 06' Supercharged Range, 08' BMW 550i
It's hard to say, because I didn't dyno it pre-tb myself. Chris (the original owner) did and it was 475rwhp and 549rwtq. But I did a couple other things, like the rotors, tweak to the s/c, wires, new kleemann tune, etc. And I dynoed it on a different dyno here in town on 100oct (with Rudy) and it dynoed at like 475rwhp with the TB. The 100oct actually results in less hp.
Neither... with my 20's
did you dyno witrh the 19s on or did you put the stock 18s on it?
MBWorld Fanatic!
Joined: Jun 2006
Posts: 1,264
Likes: 0
From: Long Island & Hong Kong
20+ to list......
Dragon,
Congrats on the numbers, I'm sure you are very happy with it. Judging from your numbers, you would be in the low 11's for sure with some practice runs.
I have a similar setup as yours except for a full exhaust by Supersprint, Quaife LSD, and the addition of Kleemann camshafts. Going to hit the track once the car is done, and dyno after that. Hopefully she will pull a good ET and lay down some decent numbers.
Congrats on the numbers, I'm sure you are very happy with it. Judging from your numbers, you would be in the low 11's for sure with some practice runs.
I have a similar setup as yours except for a full exhaust by Supersprint, Quaife LSD, and the addition of Kleemann camshafts. Going to hit the track once the car is done, and dyno after that. Hopefully she will pull a good ET and lay down some decent numbers.
MBWorld Fanatic!
Joined: Mar 2005
Posts: 1,671
Likes: 0
From: strip bar in Oregon
211 E55(sold) & 80cc shifter kart
Wouldn't this be a dead give away to the service shop when it goes in for service.
, they wouldn't notice if you replaced your motor with a lawn mower engine in there.
