MJ50's W211 Mod Fever (OEM Retrofits)
#556
Super Moderator
#559
Super Moderator
#565
Super Moderator
Thread Starter
Join Date: Jul 2003
Location: MBworld
Posts: 20,727
Received 715 Likes
on
696 Posts
bone stock E55 AMG
ok, i plugged the LED city light bulb a few days ago...
the lights were blinking...
luckily, eric came to town on time and fixed the problem.
he added a resistor at the base of the bulb and works perfect!
here are some installed pics...
all the thanks goes to eric da LED guru!
the lights were blinking...
luckily, eric came to town on time and fixed the problem.
he added a resistor at the base of the bulb and works perfect!
here are some installed pics...
all the thanks goes to eric da LED guru!
Last edited by MJ50; 07-03-2017 at 11:57 AM.
#568
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
Eric, you should do what some guy on the audi forums did. He would buy the bulbs, make the resistors and then sell the whole as a package and make a buck and help people out.
In short, can you help a brotha out?!! I want my led's up front and on my plates too!!!!
#574
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
MUHAHAHAHA..
ok, well, after thinking about it, I think I can get something going. The city bulbs will be easy, since we know the correct resistor I'll need to keep them from throwing errors.
The license plate bulbs are a different story. If you want to do the mod, you WILL have to remove your trunk lining. It's not very difficult. You'll also have to use wiretaps. I'll do a full DIY when I get back to Phoenix.
For now, I must sleep.
ok, well, after thinking about it, I think I can get something going. The city bulbs will be easy, since we know the correct resistor I'll need to keep them from throwing errors.
The license plate bulbs are a different story. If you want to do the mod, you WILL have to remove your trunk lining. It's not very difficult. You'll also have to use wiretaps. I'll do a full DIY when I get back to Phoenix.
For now, I must sleep.
#575
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
MUHAHAHAHA..
ok, well, after thinking about it, I think I can get something going. The city bulbs will be easy, since we know the correct resistor I'll need to keep them from throwing errors.
The license plate bulbs are a different story. If you want to do the mod, you WILL have to remove your trunk lining. It's not very difficult. You'll also have to use wiretaps. I'll do a full DIY when I get back to Phoenix.
For now, I must sleep.
ok, well, after thinking about it, I think I can get something going. The city bulbs will be easy, since we know the correct resistor I'll need to keep them from throwing errors.
The license plate bulbs are a different story. If you want to do the mod, you WILL have to remove your trunk lining. It's not very difficult. You'll also have to use wiretaps. I'll do a full DIY when I get back to Phoenix.
For now, I must sleep.