W211 AMG Discuss the W211 AMG's such as the E55 and the E63
Sponsored by:
Sponsored by:

PICS OF MY BEAST

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 11-02-2009, 02:04 AM
  #26  
MBWorld Fanatic!
 
bassn_07's Avatar
 
Join Date: May 2008
Posts: 3,077
Likes: 0
Received 1 Like on 1 Post
2006 E55 AMG
Looking good! When you get a chance could you take some more pictures of your rear diffuser and pm me. I've heard that some people had fitment issues with Euroteck and some gaps were quite noticeable. Is this the case with yours? I've been on the fence about getting one but just haven't pulled the trigger yet.

BTW...your car is sounds hella mean in person.
Old 11-02-2009, 03:31 AM
  #27  
Junior Member
 
gazan1204's Avatar
 
Join Date: Sep 2009
Posts: 23
Likes: 0
Received 1 Like on 1 Post
E63S
Originally Posted by psuball1
actually I had one and replaced it for the one I have. I plan on changing out the trim in the car, I just have not figured out what yet.

The grille is actually the CF one that DCT motorsports was selling.
Definitely this route: http://drycarbonwrap.com/ Looks amazing in person and cheap too!
Old 11-02-2009, 10:29 PM
  #28  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by gazan1204
Definitely this route: http://drycarbonwrap.com/ Looks amazing in person and cheap too!
i will check it out!!
Old 11-02-2009, 10:34 PM
  #29  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by bassn_07
Looking good! When you get a chance could you take some more pictures of your rear diffuser and pm me. I've heard that some people had fitment issues with Euroteck and some gaps were quite noticeable. Is this the case with yours? I've been on the fence about getting one but just haven't pulled the trigger yet.

BTW...your car is sounds hella mean in person.
thanks man. Yes, there is a bit of a gap in the corners, not bad tough.
Old 11-02-2009, 10:35 PM
  #30  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by MPRESIV
Are those 19s or 20s?
19's
Old 11-02-2009, 10:37 PM
  #31  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by Mikesamg
The best thing I love about half of the benzs I see at the track is they normally have their car seats in the car still haha but you by far have the best one, where are the pics of that?
I forgot to take a pic of it. I need to get one up...
Old 11-02-2009, 10:54 PM
  #32  
MBWorld Fanatic!
 
emoving's Avatar
 
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes on 5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Your rims look sweet! Let me know when u are ready to upgrade again!
Old 11-02-2009, 11:15 PM
  #33  
MBWorld Fanatic!
 
E55Bullet's Avatar
 
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like on 1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
was the install for the gauges expensive, and how did you do you a-pillar gauge pod? And how much boast are you running?
Old 11-02-2009, 11:19 PM
  #34  
MBWorld Fanatic!
 
The Godfather's Avatar
 
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like on 1 Post
4 wheeled car.
Originally Posted by E55Bullet
was the install for the gauges expensive, and how did you do you a-pillar gauge pod? And how much boast are you running?
OOOHH I want gauges too! :P
Old 11-02-2009, 11:37 PM
  #35  
MBWorld Fanatic!
 
E55Bullet's Avatar
 
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like on 1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
Originally Posted by The Godfather
OOOHH I want gauges too! :P

WHO WOULDN'T ????
Old 11-03-2009, 12:16 AM
  #36  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by E55Bullet
was the install for the gauges expensive, and how did you do you a-pillar gauge pod? And how much boast are you running?
I am running around 8lbs of boost. I was told that the placement of the wire for the gauge affect the boost reading also by the time it travels through the system the boost levels readings become less.

I had the A pillar gauge pods custom built and custom wrapped with material that looks exactly like the stock stuff. The entire thing with install cost around $800. It is expensive but I like the readings so it was worth it to me.
Old 11-03-2009, 12:23 AM
  #37  
MBWorld Fanatic!
 
E55Bullet's Avatar
 
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like on 1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
very cool....and not too bad considering the gauges are expensive by themselves. So the boost is not that accurate?
Old 11-03-2009, 12:51 AM
  #38  
Banned
 
James@ACG's Avatar
 
Join Date: Sep 2008
Location: San Diego, CA
Posts: 1,694
Likes: 0
Received 2 Likes on 2 Posts
07 RS4 sold, R53 Cooper S, 2008 Cayman S, 2012 GTR
Baris, nice to see some new pictures up! Did you get my voicemail?
Old 11-03-2009, 08:18 AM
  #39  
MBWorld Fanatic!
 
emoving's Avatar
 
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes on 5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Those gauges are tight!
Old 11-03-2009, 09:07 AM
  #40  
Banned
 
Full Throttle's Avatar
 
Join Date: May 2009
Location: D.C. METRO AREA
Posts: 971
Likes: 0
Received 1 Like on 1 Post
CLS55 AMG
Originally Posted by psuball1
The are called Defi gauges. I wanted a boost gauge and an oil temp gauge and I saw it on another AMG and liked it so I went for it.
Who makes the gauge pod is it custom? also what vacuum source did you use for the boost gauge.
Old 11-03-2009, 06:11 PM
  #41  
MBWorld Fanatic!
 
motorkas's Avatar
 
Join Date: Apr 2009
Location: Maryland
Posts: 1,431
Likes: 0
Received 2 Likes on 2 Posts
a Rivera...via a Custom 24, Strat and Les Paul
Looks super sick
- makes me feel REAL good about the diffuser I just got from James

How's the steering wheel compared to stock? If you had to do it again would you stick with the DCT or go for something a little smaller in diameter like a black series wheel?
Old 11-03-2009, 08:27 PM
  #42  
MBWorld Fanatic!
 
CharlyE500's Avatar
 
Join Date: Dec 2008
Location: Socal, Chino
Posts: 4,402
Received 60 Likes on 48 Posts
E55 2006 / CLS55 / S450 / Jag XKR2011
I just love the interior....... Sport car with Wood trim, I wish my car is wood trim, classic look and FAST, nice combination.
Old 11-04-2009, 12:08 AM
  #43  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by motorkas
Looks super sick
- makes me feel REAL good about the diffuser I just got from James

How's the steering wheel compared to stock? If you had to do it again would you stick with the DCT or go for something a little smaller in diameter like a black series wheel?
I actually think the BS wheel would be too small. I love the look and feel of this wheel.
Old 11-04-2009, 12:11 AM
  #44  
Super Member
Thread Starter
 
psuball1's Avatar
 
Join Date: Apr 2007
Location: San Diego
Posts: 701
Likes: 0
Received 2 Likes on 2 Posts
04 E55, 12 GL 450(wife)
Originally Posted by Full Throttle
Who makes the gauge pod is it custom? also what vacuum source did you use for the boost gauge.
The gauge pod was custom made. The vacum line from the gauge goes to the bottom of the intercooler.
Old 11-04-2009, 04:53 AM
  #45  
MBWorld Fanatic!
 
VCA_AMG's Avatar
 
Join Date: Feb 2009
Location: So Cal
Posts: 1,291
Likes: 0
Received 2 Likes on 2 Posts
'15 E63S wagon
Originally Posted by psuball1
I haven't taken pics in a long time so I decided it was time. I am not a very good photographer but I gave it my best shot...
Very very pun-ny! lol

Great looking ride
Old 11-04-2009, 04:58 AM
  #46  
Senior Member
 
harjothundal's Avatar
 
Join Date: Dec 2008
Location: Northern California
Posts: 361
Likes: 0
Received 3 Likes on 3 Posts
05 e55
Originally Posted by psuball1
thanks man. Yes, there is a bit of a gap in the corners, not bad tough.
this concerns me as i too was considering the rear diffuser... dou have have any close up shots?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: PICS OF MY BEAST



All times are GMT -4. The time now is 03:49 AM.