Don Nguyen

I don't get too many Hyundais that come by to get vinyl work done, but the owner of this blue Hyundai Elantra contacted me to see if I could vinyl wrap his roof in my gloss black material. The owner of this car was somewhere around Orange County or maybe Inland Empire area, and came out to me in Anaheim Hills. This will give a good idea to guys who have a blue car or just a darker colored car in general of how a gloss black roof looks like on their car. It is a very subtle addition. So if you're looking for something that stands out more, you'd want to go with a matte black vinyl finish.

I forgot to clean the roof before we pulled the car out, so trying to clean the roof out int he sun/heat left a lot of water streaks which showed up in all of the pictures.

I had some people ask for some closer up pictures, so I took some of around the front area, sides of the roof and around the antenna area to show you guys how clean everything is installed and there is no paint showing even around the antenna area.

Before:





After:

You can see from a little further back it's not as noticeable.


However, once you get closer, the gloss black roof starts becoming more noticeable.














-Don

donathon@gmail.com

Don Nguyen

This is for the guys who have asked what would look good on their car if they have a carbon fiber hood. Hopefully these pictures can help those of you out a bit. Here's a blue Nissan 350z's roof that I vinyl wrapped with my gloss black material. I wish I had more/better pictures, but it was a bit dark and some of the pictures didn't turn out too good. The owner of this car was somewhere around the Los Angeles or Pasadena area and come down to me in Orange County to have his roof wrapped. You can see the gloss black roof accents the black hood fairly nicely, since they're both glossy finishes/surfaces. This is another good example of how a black roof looks like on a darker colored car such as this blue.









-Don

donathon@gmail.com

Don Nguyen

Been playing catch up in trying to post pictures of all of the previous cars that I have done. I am just going to jump ahead a bit and start posting pictures of more recent cars that I have done. More recent as in a couple of weeks instead of a couple of months or even a year ago, haha.

Either way, here is a gray/graphite colored Mercedes Benz C300 that I vinyl wrapped the factory chrome window trim with my matte black finish vinyl material. We went with the matte black on this car instead of the gloss black vinyl so that the it blended in with the rubber/weather stripping around the car. The owner of this car was from around Red Lands I believe and came out to me in Orange County/Anaheim Hills to have me vinyl his car.

As a note, any other vinyl on the car was not done by me.

Before:








After:













-Don

Donathon@gmail.com

Don Nguyen

Thanks

Here is a white BMW E93 M3 convertible that I vinyl wrapped the chrome window trim to give it the shadowline/blacked out look. Convertibles are a bit more tedious to do since there are so many separate pieces, but it's doable. We went with the matte black to give it a more subtle look and blend in with the rubber weather pieces that are around the window trim pieces. I believe the owner of this car was either around in Orange County or near the Los Angeles area and he came out to me in Anaheim Hills to get the vinyl work done. It was a pretty new car. Still had the red striped Euro plate on it.

Before:








After:

















-Don

Donathon@gmail.com

tommy gun rally

Don -

Do you have any pictures of the car's paint after you have removed your vinyl after say a year or two? That is my main concern, that once the vinyl comes off that it leaves some kind of mark or residue on the paint. I was a big fan on NASIOC with my 10 WRX, now here with my E55.

Thanks!

Eli

Don Nguyen

I don't have any pictures, since usually the customer just remove the vinyl off themselves once they no longer want it on there or for whatever other reasons, and don't need to come to me to remove it. I haven't had any of my customers tell me of having any issues with it though.

If a car's been repainted and the paint wasn't as good as the original factory paint,then I can possibly see that being an issue. However, I personally would not work on any car that's been repainted. Just too many unknown variables at that point.

-Don

Don Nguyen

I have to apologize beforehand. I did get a bit carried away with how many pictures I took of this white BMW 1 series. The owner of this car was from around the Los Angeles area and came out to me in Orange County/Anaheim Hills to get the vinyl work done. He originally was only going to get the roof of his white 135i wrapped in my gloss black vinyl material. However, once there and having the roof done, he decided to also tint/smoke out the tail lights on his 135i as well, to compliment the black roof.

I tried to take slightly more detailed pictures this time around, as by request, to show the edges of the roof, etc. I think that the tint/smoke shade that I used on the back tail lights give it a nice cherry red color without being too dark and completely blacking out the tail lights.

Let me know what you guys think.

Before:




During:






After:




















-Don

donathon@gmail.com

Don Nguyen

This is a gray E46 M3 that I vinyl wrapped the roof in my gloss black material. Went with the gloss black to give it that more factory look, to simulate somewhat of a CSL look, even though the CSL had a real CF roof. The owner of this car was also in Orange County as well.

Before:





After:

















-Don

donathon@gmail.com

Don Nguyen

Haven't had much of a chance to post pictures in a while, but finally getting some time to do so again.

Here's a black Mercedes Benz C300 that came out to me in Anaheim Hills/Orange county to have his window trim vinyl wrapped in matte black. We blacked out the chrome on his car. Unlike BMWs, the Mercedes does not have the shadowline/black trim option.





















-Don

donathon@gmail.com

Don Nguyen

I don't normally post pictures of kind of off/side projects that aren't from the normal roof, window trim, etc. However, I figure I'll start posting them more since I've had quite a few requests or people ask me about this.

Here's a SC400 that I vinyl wrapped the lower lip on the bumper in the 3M 1080 glossy carbon fiber vinyl material. The lip was fairly damaged, hence the crack which you can clearly see through the material and some other small chips along the bottom edge of the lip. I do not usually wrap lips, since they require a seam line in the middle, due to the lengths that lips usually are (~7'-8'). In the picture taken front on, you can see the small seam line a couple of inches to the left of the crack. To some that may be acceptable, while to others it may be something they'll always see/notice. Hopefully this will give you guys somewhat of a better idea of how it'll work/look.









-Don

donathon@gmail.com

Biffed

Don is the man. He did my w211 e63 on Friday and I love it. Best work by far.

Don Nguyen

Thanks for the +1. Glad you liked it. I will try to post pictures of your car soon, since it's not often you see pictures of a Mercedes with a matte roof, but your car pulls it off nicely.

-Don

Don Nguyen

It's not often I get bigger bodied cars like this E65 745il come by to have vinyl work done on their cars. However, the owner of this car contacted me to see if I could black out the chrome on his window trim, to give it the shadowline look. We ended up going with the matte black finish over the gloss black finish so that it'd match the rubber around the windows and the already matte door pillar pieces. The owner of this car was from Los Angeles area and drove out to me in Orange County to have the vinyl work done.















-Don

donathon@gmail.com

Don Nguyen

Here is a black Mercedes Benz CLS63 AMG that came by to have me vinyl wrap his chrome window trim in my matte black vinyl material to black it out. The owner of this car was also from Irvine/South Orange County and came out to me in Anaheim Hills to have the vinyl work done. I think the matte black still goes fairly well on the black car, since the trim does not just blend in with the rest of the car, but still accents the trim pieces nicely.







After:














-Don

donathon@gmail.com

Don Nguyen

This is something different than what you guys are used to seeing me post. I vinyl wrapped the center/raised portion of the hood on this white BMW E92 M3 with my matte black vinyl material. Of course, the roof on this car was already carbon fiber, so I did not have to do anything with that. However, the owner of this car wanted to give it a more aggressive look without it being permanent and no other vinyl shops were willing to do this on his car. Luckily he found me, and I've done this for several cars in the past before, so it wasn't a problem. Owner of this car was from around south Orange County and came over to me in Anaheim Hills.

















-Don

donathon@gmail.com

Don Nguyen

The owner of this car came out to me in Orange County from around Los Angeles somewhere to get the roof of his silver 350z wrapped in my gloss black vinyl material.

Before:




After:











-Don

donathon@gmail.com

Don Nguyen

Usually when I black out window trim it is because they are chrome/brushed aluminum, but in this case, the originally black window trim on this car had just faded to a copperish metal hue. So what I did was just applied some of my gloss black vinyl material onto the lower window trim pieces and on the small rear quarter window vertical pillar that had also faded.

If there is enough interest in this, I can set up a group buy type of deal for it and have a group of you guys come by in on an assigned day to all get it done.

Before:




During (only the lower rear door trim piece is covered in the gloss black vinyl in these pictures):






After:








-Don

donathon@gmail.com

Don Nguyen

I've had quite a few requests for tinting tail lights recently, so I decided to post up some more pictures of them for you guys. The owner of this car was actually a firefighter at a station local/right down the street from me in Irvine, so I dropped by there to tint/smoke the tail lights and the top portion of the headlights on his black E60 550i.

Tinted/smoked left side, stock/untinted right side:




Both sides tinted:


Top portion of the headlights tinted/smoked:




-Don

donathon@gmail.com

Don Nguyen

I worked on this black Bentley GT Continental coupe a while back. He brought his car by to have me black out the chrome window trim on his car. Originally he was going to go with gloss black, but once he got here we decided to go with the matte black to still give the covered pieces some contrast with the rest of the car. Also wrapped the chrome accents that were along the bottom of the car and his door handles. He was around Mission Viejo or so and came out to me in Anaheim Hills/Orange County.

Before:




After:














-Don

donathon@gmail.com

Don Nguyen

One of my previous customers that had me vinyl wrap the roof on his 335i E92 sold his car and got a new car. He purchased the new limited edition matte black C63 coupe from Mercedes. Everything looked good on the car, except for the chrome window trim that blatantly stood out, especially against the matte black paint on the rest of the car. It's not often that I get a matte black car that comes in to have their window trim vinyl wrapped. He decided to go with gloss black for the window trim, to give it some contrast still, and I think it turned out great.

Before:




After:








-Don

donathon@gmail.com

Don Nguyen

I'll try and change things up a bit here. Here's a silver Honda Civic that came by to get his roof wrapped in my matte black vinyl material versus gloss black which most people usually go with. This will help others who have a silver car or a glass sunroof and want to see what a matte black vinyled roof would look like on their car and how it contrasts, etc. The owner of this car was from Irvine/Orange County as well.

Before:




After:








Blacked out the chrome trunk handle piece on the rear:


-Don

donathon@gmail.com

Don Nguyen

Trying to gauge if there is any interest in this flat black vinyl finish. I haven't posted pictures of this finish/material before, but I recently had a someone ask if I had something that was flatter than my matte black vinyl material. So, who's interested?

Flat black is on the left and matte black is on the right:




-Don

donathon@gmail.com

Don Nguyen

I've been running a special on the 3M Di-noc matte carbon fiber vinyl wraps and the owner of this silver ISF drove up from San Diego to me in Orange County to have it done. This is the matte carbon fiber finish. I wrapped both his roof and his side door pillars with the 3M di noc material. I thought it looked great against the silver paint/color of the car. The cf pattern really gave this ISF a more aggressive presence. It also matched the darker wheels fairly well also.

Before:




After:
















-Don

donathon@gmail.com

Don Nguyen

Nothing fancy this time around. I vinyl wrapped the trunk handle, which was the last piece of chrome that was on this sapphire black 550 GT. The owner of this car was in Irvine as well. This will help out those who've asked me what my gloss black vinyl material looks like against metallic black paint/finishes. There's still a slight contrast to it, which I think is cool, so it still accents the trim pieces on the car a bit versus just blending in completely.







-Don

donathon@gmail.com

Don Nguyen

Even though I mainly specialize in European cars, interestingly enough, I have still had quite a few of these new Kia Optimas come by to get work done on their cars. I had this customer e-mail me to see if I could vinyl wrap the roof of his white Kia Optima with my gloss black vinyl material to give the roof that panoramic roof look/effect. Even though the roof of this car protruded outwards in the middle, unlike most cars, I was still able to wrap the roof without any issues.











-Don

donathon@gmail.com