Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I think many would not think about it, but even this black Mercedes Benz S63 AMG looks good with the chrome blacked out. Even with the brighter colored/finished wheels, the blacked out chrome/brushed aluminum trim still goes with the look of the car very well and actually makes the car look very sleek imo. In addition to the window trim, I also blacked out the lower door chrome pieces that run the length of the car. I also tinted the headlights and turn signal reflectors with my light tint/smoke film. For this car, we went with my gloss black vinyl finish to match the already gloss black vertical pillars and overall the gloss black just suited this car better than matte black would have. The owner of this car brought his car up to me in Anaheim Hills/Orange County from San Diego to get the vinyl work done.
Before:
During (note driver side headlight and mirror turn signals are tinted, while passenger side is stock)
After:
-Don Nguyen
donathon@gmail.com
Before:
During (note driver side headlight and mirror turn signals are tinted, while passenger side is stock)
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I had this white Mazda MazdaSpeed3 come in to have me vinyl wrap the roof of his car in the 3M dinoc matte carbon fiber vinyl material. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. As you can see from the pictures, the carbon fiber weave is more noticeable at certain angles and depending on how the light hits it. In some pictures it'll look like just a matte/flat black roof, while in other pictures you can really notice the carbon fiber weave/pattern, which gives it a very cool effect.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is kind of a bigger picture post than usual, but I had multiple requests for more up close pictures and of certain areas that are pictured below. The owner of this white Audi RS5 had me vinyl wrap the roof and also black out the brushed aluminum/chrome window trim on his car with my gloss black vinyl material. The gloss black roof tied in quite nicely with the large sunroof of the car, to give it a full/complete panoramic roof look. Also, just blacking out the chrome around the windows also changed the look of the car quite a bit, even though the mirrors are still silver. The owner of this car drove out to me in Anaheim Hills/Orange County from Los Angeles to get the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this car previously had me black out the chrome around his window trim and rear trunk bar as well as lightly tint the tai lights. However he decided to come back to also have me wrap the rear trunk spoiler of his car in the 3M 1080 gloss carbon fiber vinyl material as well, to match the real carbon fiber diffuser he just had put on. Hopefully this will give you guys somewhat of an idea of how the gloss carbon fiber vinyl compares to real carbon fiber parts. The owner of this car drove out to my shop in Anaheim Hills/Orange County to have the work done. Note, not all spoilers are possible or practical to wrap due to its shapes/curves, but this one happen to be an exception.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
These aren’t the best pictures that I have taken, but I had someone request me to post some pictures of work that I’ve done on the new Lexus GS350. For this silver/grey GS350, I vinyl wrapped the roof in gloss black, lightly tinted/smoked the tail lights, and blacked out the center middle section of the front bumper. The owner of this car brought their car to me in Anaheim Hills/Orange County to have the work done. I think overall, the subtle changes to the car gave it a nice different/change of look without making it look too aftermarket or modified.
Before:
Driver/left side tinted/smoked - passenger ride side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side tinted/smoked - passenger ride side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Had a request to post some pictures of a white car with gloss black vinyl applied on the trim. The owner of this white Mercedes Benz C63 coupe had me vinyl wrap the chrome/brushed aluminum trim on his car with my gloss black vinyl materials. The owner of this car was in Irvine and drove out to me in Anaheim Hills/Orange County to have the work done. The black trim definitely gave the coupe a much sportier look and complemented the rest of the car fairly well.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is another car that I did for Hyundai for the most recent SEMA event. I had also done their Veloster that they had built for SEMA the year prior as well. This year they used their SUV the Santa Fe for the SEMA event. They had me come by their facilities to vinyl wrap the top of the SUV in the 3M 1080 gloss carbon fiber vinyl material. Not often that I do the roof of a SUV or such a large car in general. Obviously for this car, the carbon roof was chosen to make it stand out and go with the more aggressively modified look/theme of the car.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Not many people know that I use/have other colors of head/tail light film in addition to the normal tint/smoke films that most people typically have me use on their cars. The owner of this Mini Cooper brought his car by to have me tint his head lights yellow and his tail lights with red. I know the yellow headlights isn’t for everybody, but the owner of this Mini wanted to do something different, and it’s always possible to go back to stock/reversible with vinyl. The owner of this car drove out from Inland Empire to me in Anaheim hills/Orange county to have the work done.
Before:
After (note the headlights are on in these pictures):
-Don Nguyen
donathon@gmail.com
Before:
After (note the headlights are on in these pictures):
-Don Nguyen
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this car drove from Los Angeles to me in Orange County/Anaheim Hills to have me do some vinyl work on his brand new white Mercedes Benz CLS 550. We went with gloss black for his roof, side roof rails, and center portion of the lower bumper. Then for the chrome side window trim, we went with matte black for those. Finally, for the tail lights, I used my transparent red vinyl to red out the clear/white portion of his tail lights to give it a single complete red appearance/color.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This specific car is not the typical case of a car coming in with chrome/brushed aluminum trim and wanting me to black out their trim with my vinyl materials. The owner of this BMW E30 M3 brought his car in to have me vinyl wrap the previously painted gloss black trim with my matte black vinyl. I know it may be a bit hard to tell, but if you look at the pictures side by side or back to back it may be easier to notice the differences between how matte black trim vs gloss black trim looks like on a car.
This is also good for those who have asked me in the past how well vinyl will cover up bumps/dents/etc. As you may see in some of the pictures, whoever did the paint job on the trim did not do that good of a job, which left the trim a bit lumpy/uneven. If you can’t see or make it out in the pictures, any imperfections that are underneath the vinyl will show through, as the material is fairly thin and basically takes on the shape of the surface/pieces that they are being applied on over.
Before:
After:
-Don Nguyen
donathon@gmail.com
This is also good for those who have asked me in the past how well vinyl will cover up bumps/dents/etc. As you may see in some of the pictures, whoever did the paint job on the trim did not do that good of a job, which left the trim a bit lumpy/uneven. If you can’t see or make it out in the pictures, any imperfections that are underneath the vinyl will show through, as the material is fairly thin and basically takes on the shape of the surface/pieces that they are being applied on over.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white Nissan 350z brought me his car to have me vinyl wrap the roof of the car in my gloss black vinyl material. In addition to the roof, I also did his two side vertical pillars with the 3M dinoc matte carbon fiber vinyl material. I believe the owner of this car was from around Long beach and drove his car out to me in Anaheim Hills/Orange county to get the work done. The gloss black, especially on the 350zs or similar smaller two seater cars, the gloss black roof connects and continues the front and rear glass fairly nicely.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I feel like sometime the only cars I do are BMWs, then I go on a stretch not doing any BMWs for a while. Either way, the owner of this silver E46 BMW M3 brought his car in to have me vinyl wrap the roof of his car in my gloss black vinyl material. It was also a nice change of pace to have a non-white colored car come in for some vinyl work done. The owner of this car drove his car to my shop in Anaheim Hills/Orange County to have the work done. I think the gloss black roof on the silver really contrasts and compliments it fairly well.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I always do enjoy having modified cars come by to have work done on their cars. The owner of this carbon black BMW E39 M5 came by to have me apply my light tint material to his whole tail light. This is the same material/shade that you see me using in all of my previous pictures of tinted tail lights. It may appear slightly lighter on this specific car, but that’s because on darker colored cars (IE black, dark grey, etc) the contrast between the tint shade and the car is not as big, so it’ll appear lighter than it does on lighter colored cars (IE white, silver, etc). He drove out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
Left/driver side tinted - Right/passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Left/driver side tinted - Right/passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I always take requests, if anyone is trying to look for a specific example of my vinyl work on a certain type of color or car. In this case, I had someone ask me if I could post pictures of blacked out window trim on a red colored car. The owner of this red Audi S5 had me black out his chrome/brushed aluminum window trim with my matte black vinyl material. I believe the owner of this car was from Los Angeles and drove out to me in Anaheim Hills/Orange County to have the work done. I think the matte black provides a nice contrast with the bright color of the car, but I think gloss black would have looked just equally as good in this case.
Before:
After:
Note: The bump that can be seen on the top rear quarter window trim piece is a factory bump/seam and not due to any installation reasons/issues.
-Don Nguyen
donathon@gmail.com
Before:
After:
Note: The bump that can be seen on the top rear quarter window trim piece is a factory bump/seam and not due to any installation reasons/issues.
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This picture set is a lot shorter than what I normally post, but I get a lot of requests for pictures of carbon fiber wrapped front lips. The owner of this white Mercedes CLA sedan came by to have me wrap the back 1/3rd of his roof in gloss black, to complete the panoramic look of his car. In addition to the roof, he also had me wrap the front lip of his car int he 3M 1080 gloss carbon fiber vinyl material. Due to the size of his front lip, I had to do it in three different pieces/sections. I decided to make two seam lines that lined up/matched two edges of the bumper’s lower grill. Unfortunately, due to how late it was when the owner of this car came, it became dark very quick and it was hard to photograph pictures of the car once it was done with the lighting that was available inside. The owner of this car drove to me in Orange county/Anaheim Hills from Los Angeles to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this white Audi A6 sedan, I vinyl wrapped the roof in my gloss black vinyl material and also lightly smoked/tinted the tail lights of his car. I liked the way this turned out, because the changes with the gloss black roof and lightly tinted tails really gave the car a different look without making it look too modified. If you didn’t know or didn’t look very closely, most would probably have thought it came from the factory like this. The owner of this car brought his car out to me in Anaheim hills/Orange county to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I know the before/after differences may not show up well in the pictures, but for those who own these cars and are familiar with it, I am sure you can see/notice the differences. The owner of this white Lexus IS250 brought in his car to have me apply a clear red transparent film over the orange amber portion of his tail lights. This gives the tail lights a nice consistent red tone/finish to the entire tail light, without having the random orange amber break up the tail light’s lines. In addition to the tails, I also applied a clear transparent yellow film to his head lights. I typically use the yellow for fog lights, but I have had quite a few requests for the yellow to be applied on head lights in the past and lately.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this new jet black Lexus IS250 sedan had me vinyl wrap the chrome/brushed aluminum window trim. The blacked out trim makes a huge difference on dark colored cars, as you can see in the pictures below. For this car, we went with the gloss black vinyl finish for the material, to have the window trim of the car blend in with the black paint on the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this car was from out of state and brought in his car to me in Orange County/Anaheim Hills to get some vinyl work done on it. He had me vinyl wrap the roof in the 3M dinoc matte carbon fiber finish and also had me light smoke/tint his rear tail lights on his white BMW 128i coupe. The owner of this car was trying to replicate the look that the M3 E92 coupes have on roofs stock carbon fiber from the factory. This is as close as you’re going to get to that effect/look without actually changing out the entire roof.
Before:
During: Driver/left side tinted/smoked - passenger/right side stock
After:
-Don Nguyen
donathon@gmail.com
Before:
During: Driver/left side tinted/smoked - passenger/right side stock
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a previous car that I had worked on. The owner of this white VW Golf R sedan had me vinyl wrap his roof in the 3M matte carbon fiber vinyl about a year. He came back because he wanted me to wrap his side window pillars and mirrors in the same 3M matte carbon fiber material. Note - Typically it is not practical or possible to wrap mirrors, due to their shape/curves, but it worked out in this case due to the design of the mirrors on this car. Most mirrors that you see wrapped in pictures are either done in multiple pieces or only show how it looks like right after it is wrapped, which doesn’t show how it holds up over time.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Thanks! I sell materials for those who aren't local and want to DIY as well.
The owner of this car was from Irvine as well and brought their car to me in Anaheim Hills/Orange County to have me vinyl wrap their brand new white Lexus IS350 sedan. I did the roof in my gloss black vinyl material. In addition to the roof, I also did the body line in the rear right under the tail light in the same gloss black as well as right under the front head light, between the headlight and turn signal in the bumper, with gloss black as well. It was interesting doing something different/custom on this car, although it may not be most people’s style.
Before:
After:
-Don Nguyen
donathon@gmail.com
The owner of this car was from Irvine as well and brought their car to me in Anaheim Hills/Orange County to have me vinyl wrap their brand new white Lexus IS350 sedan. I did the roof in my gloss black vinyl material. In addition to the roof, I also did the body line in the rear right under the tail light in the same gloss black as well as right under the front head light, between the headlight and turn signal in the bumper, with gloss black as well. It was interesting doing something different/custom on this car, although it may not be most people’s style.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this car was from Irvine as well and brought their car to me in Anaheim Hills/Orange County to have me vinyl wrap their brand new white Lexus IS350 sedan. I did the roof in my gloss black vinyl material. In addition to the roof, I also did the body line in the rear right under the tail light in the same gloss black as well as right under the front head light, between the headlight and turn signal in the bumper, with gloss black as well. It was interesting doing something different/custom on this car, although it may not be most people’s style.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I am considering doing a group buy on tinted/smoked tail lights. If I can get around 5-10 people together, I can give a group discount. If you’re interested in this, e-mail me directly at donathon@gmail.com
This brand new white Mercedes C250 sedan came in to have me wrap his roof in my gloss black vinyl material and also tint/smoke his tail lights. I took several comparison pictures of the tail lights before/during/after and inside/outside, to show you guys the progress and how it looks like in different lighting. The owner of this car brought his car in to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - passenger/right side stock:
Both sides tinted/smoked:
Stock/untinted:
Smoked/tinted:
After:
-Don Nguyen
donathon@gmail.com
This brand new white Mercedes C250 sedan came in to have me wrap his roof in my gloss black vinyl material and also tint/smoke his tail lights. I took several comparison pictures of the tail lights before/during/after and inside/outside, to show you guys the progress and how it looks like in different lighting. The owner of this car brought his car in to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - passenger/right side stock:
Both sides tinted/smoked:
Stock/untinted:
Smoked/tinted:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I am considering doing a group buy on tinted/smoked tail lights. If I can get around 5-10 people together, I can give a group discount. If you’re interested in this, e-mail me directly at donathon@gmail.com
This brand new white Mercedes C250 sedan came in to have me wrap his roof in my gloss black vinyl material and also tint/smoke his tail lights. I took several comparison pictures of the tail lights before/during/after and inside/outside, to show you guys the progress and how it looks like in different lighting. The owner of this car brought his car in to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - passenger/right side stock:
Both sides tinted/smoked:
Stock/untinted:
Smoked/tinted:
After:
-Don Nguyen
donathon@gmail.com
This brand new white Mercedes C250 sedan came in to have me wrap his roof in my gloss black vinyl material and also tint/smoke his tail lights. I took several comparison pictures of the tail lights before/during/after and inside/outside, to show you guys the progress and how it looks like in different lighting. The owner of this car brought his car in to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - passenger/right side stock:
Both sides tinted/smoked:
Stock/untinted:
Smoked/tinted:
After:
-Don Nguyen
donathon@gmail.com
