Installed eurotek CF diffuser (DIY w/pix)
#27
Former Vendor of MBWorld
Did you clean the area about 2 times with a lot of rubbing alcohaul? that is key!
#32
MBWorld Fanatic!
Join Date: Apr 2008
Location: Arizona
Posts: 2,540
Likes: 0
Received 4 Likes
on
4 Posts
2004 E55, 1997 E320 "Sold"
Yes, cleaning is imperative to having it stick and for longevity. The only drawback is once it is sticked on there is no adjusting, so be careful! Other than that, I also used mineral spirits to help remove the old adhesive stuck to the bumper before doing the alcohol.
#34
Banned
Join Date: Jun 2007
Location: Brooklyn
Posts: 2,048
Likes: 0
Received 0 Likes
on
0 Posts
02 S500 Sport
#35
Senior Member
so did you use any screws. did you come from the back side or just tape. I am looking at putting one on but its an another brand. probably not a good of quality but looks nice. its about 1/2 thick so tape and screws were my thoughts coming in from the back side.
#36
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2008
Location: Queens, NY
Posts: 1,762
Likes: 0
Received 1 Like
on
1 Post
04 w211 E55
I used what came with the diffuser. The screws went thru the holes I drilled and I tightened it with the nut that came with it.
#37
Resurrecting this thread. What kind of epoxy did you use? The majority of the 2 part epoxys sold in stores are very small tubes.