New Pics, thought you would like.
#1
Member
Thread Starter
Join Date: Jan 2010
Location: Winter Park, FL
Posts: 206
Likes: 0
Received 2 Likes
on
2 Posts
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
New Pics, thought you would like.
Haven't posted many pics since I picked up a few months back.
Had quite a bit work to do to make it perfect again and to really make it my own creation.
2003
Carbon Fiber themed, from diffusers to door pins.
Star Lowered
Euroteck Rear Diffuser-I must say perfect fit
New Heat Exchanger with my own touches
PC'd the Surge Tanks
HID Fogs
Straight pipes to Stock Mufflers, no cats or res. Getting ready for more airflow.
See Sig for other mods
Well I have had the car for several months and have not even had time to enjoy it till now after reconditioning the beast fixing the recent vandalism. I went through the entire car and repaired or replaced everything I could. Inside and out every single bolt, screw, retainer, plastic grommets, etc has been accounted for now. Its amazing how many can go missing in so many years and prior owners, especially underneath the car. I am 75% done with upgrading all my interior lighting, Ill post pics and the "solutions" when I am finished.
Coming Up:
I have a list of warranty work to be performed within the next couple weeks. Then to put on the LT headers along with the the Renntech Pulley that's sitting in my garage.
Some G2 Merlot caliper paint and to finish it off of course some sick 19" wheels. The 18's are just a bit small looking now.
Also planning on doing E63 conversion, so if anyone is looking for a newly painted COMPLETE front end, come with grills, lights, etc.., send me a PM and we can work something out.
Hope you like!
Check out all pics here
http://superamg.shutterfly.com/
Had quite a bit work to do to make it perfect again and to really make it my own creation.
2003
Carbon Fiber themed, from diffusers to door pins.
Star Lowered
Euroteck Rear Diffuser-I must say perfect fit
New Heat Exchanger with my own touches
PC'd the Surge Tanks
HID Fogs
Straight pipes to Stock Mufflers, no cats or res. Getting ready for more airflow.
See Sig for other mods
Well I have had the car for several months and have not even had time to enjoy it till now after reconditioning the beast fixing the recent vandalism. I went through the entire car and repaired or replaced everything I could. Inside and out every single bolt, screw, retainer, plastic grommets, etc has been accounted for now. Its amazing how many can go missing in so many years and prior owners, especially underneath the car. I am 75% done with upgrading all my interior lighting, Ill post pics and the "solutions" when I am finished.
Coming Up:
I have a list of warranty work to be performed within the next couple weeks. Then to put on the LT headers along with the the Renntech Pulley that's sitting in my garage.
Some G2 Merlot caliper paint and to finish it off of course some sick 19" wheels. The 18's are just a bit small looking now.
Also planning on doing E63 conversion, so if anyone is looking for a newly painted COMPLETE front end, come with grills, lights, etc.., send me a PM and we can work something out.
Hope you like!
Check out all pics here
http://superamg.shutterfly.com/
#3
MBWorld Fanatic!
The PICs look extremely impressive! Very sic looking ride. Sweet wheels. +1 on the show through AMG front end, that won't work with the E63 conversion (:
#5
Member
Thread Starter
Join Date: Jan 2010
Location: Winter Park, FL
Posts: 206
Likes: 0
Received 2 Likes
on
2 Posts
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
THX
Thanks.
When I get there, I will figure out something else unique
Good ole DiNoc... starting using it on the center console, then I figured I didn't even want to mess with an intake till after headers and pulley for obvious reasons. So looks is what I was after for the meantime.
Thanks.
When I get there, I will figure out something else unique
Good ole DiNoc... starting using it on the center console, then I figured I didn't even want to mess with an intake till after headers and pulley for obvious reasons. So looks is what I was after for the meantime.
Trending Topics
#9
Member
Thread Starter
Join Date: Jan 2010
Location: Winter Park, FL
Posts: 206
Likes: 0
Received 2 Likes
on
2 Posts
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
Oh I know!
Thanks
I had to do something different, when i decided to stay with the old front end, I figured I would liven it up a bit, also been getting a ton of comments at night from the Beast Eyes..... they were already on the car I just redid with some new LED's. I soon as I see some prey on the road, I flip them on and attack
Again, thanks for the comments.
Thanks
I had to do something different, when i decided to stay with the old front end, I figured I would liven it up a bit, also been getting a ton of comments at night from the Beast Eyes..... they were already on the car I just redid with some new LED's. I soon as I see some prey on the road, I flip them on and attack
Again, thanks for the comments.
#11
MBWorld Fanatic!
Love it! I used to have the same interior in my CLK430 and love it in yours. Thanks for sharing!
#14
Member
Thread Starter
Join Date: Jan 2010
Location: Winter Park, FL
Posts: 206
Likes: 0
Received 2 Likes
on
2 Posts
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
Haha, I bet you do. It is running strong as ever.
Vids are next.
Ill tell you what Alex, the exhaust note is sick.....just wondering how loud it will be with the headers....
And I agree, I love the interior too.....nice when you drive as much as I do.
#15
MBWorld Fanatic!
Sweet looking ride. The double badges look ghey and really ricey though.
#17
Member
Thread Starter
Join Date: Jan 2010
Location: Winter Park, FL
Posts: 206
Likes: 0
Received 2 Likes
on
2 Posts
S63 AMG, E55 AMG,C Class AMG CLK55 AMG, Jeep Rubicon
HaHa, talk to your boy aleksander about that doozie.. That was on the car when I bought it...... I actually have the car going in for paint work on the pass front quarter and wasnt worrying about badging till then. there is a crack in the paint right next to them. Plan on keeping only the kompressor and blacking the rear badges match the carbon and pano.
get that all the time
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)