Cross country driving...
#1
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 1,477
Likes: 1
From: Colorado
07' SL65, 04' E55, 03' Evo8, 08' GSXR, DSM's...
Cross country driving...
Anyone ever take their E55's on long road trips? I'll be doing about a 1700 mile trip probably this weekend and hope all goes well. Any "special" things anyone recommend i bring for the car?
Aaron
Aaron
#2
I've done multiple trips from Northern California to Vancouver BC, roughly 900 miles per way... The 55 drives like a dream with more muscle than you'll ever need... I always take an extra quart of oil with me for emergency purposes, but thankfully I've never needed to use it...
#3
MBWorld Fanatic!
Joined: Sep 2008
Posts: 4,336
Likes: 7
Porsche 991S, Cayenne S, 1972 BMW 3.0CS E9 Coupe
Just travel within a 100 mile radius from a Mercedes dealership and you'll be fine.
j/k. These cars are made for cruising. Bring along a radar detector....
Have a good trip.
j/k. These cars are made for cruising. Bring along a radar detector....
Have a good trip.
#4
#5
I have my 9500ix and have been busted twice so I am selling it now. It has saved me probably twice in six months, but also failed me twice, so speeding I will not do anymore.
#6
Plus, where I live the cops will lie and say they caught you speeding with radar even though you know for certain they could have not of trapped you because your radar says there were not signals.
#7
MBWorld Fanatic!
Joined: Oct 2006
Posts: 3,642
Likes: 11
From: Caribbean/Florida/Colorado
E-ZGO 53hp., 1999 E 430 sport, 2004 E 55, 2008 Tahoe LTZ on 24"s
Trending Topics
#8
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 1,477
Likes: 1
From: Colorado
07' SL65, 04' E55, 03' Evo8, 08' GSXR, DSM's...
/\ Thanks for all the responses! Of course, i will be bringing my good ol' V1. I figured the car would be fine, since i have done it in other type of "cheaper" cars with no problems whatsoever. I just wanted to make sure and get some other opinions on others who have done it.
Aaron
Aaron
#9
As someone mentioned, check the tires but especially the inside tread. I've seen them wear unevenly on several E's. If you're using the MB navigation and plan to take scenic routes or detours, get an updated DVD. This made a huge difference for me when I went from an '06 to '09 DVD.
#13
MBWorld Fanatic!
Joined: Jul 2009
Posts: 1,347
Likes: 1
From: Dallas, TX
2007 E63, 2005 Dodge Ram Hemi
#17
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 1,477
Likes: 1
From: Colorado
07' SL65, 04' E55, 03' Evo8, 08' GSXR, DSM's...
So does anyone else second to change out the crank position sensors now? Is there a way to test them? The car is going into the dealer today for a full inspection, if people agree on changing them, maybe i can have them change it out while it's there or i can just buy one and take it with me?
Aaron
Aaron
#18
Just do it, and it's one less worry on a long road trip.
#20
So does anyone else second to change out the crank position sensors now? Is there a way to test them? The car is going into the dealer today for a full inspection, if people agree on changing them, maybe i can have them change it out while it's there or i can just buy one and take it with me?
Aaron
Aaron
DIY here: https://mbworld.org/forums/w211-amg/...-diy-pics.html
#21
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 1,477
Likes: 1
From: Colorado
07' SL65, 04' E55, 03' Evo8, 08' GSXR, DSM's...
I will buy one anyways, and carry it with me just in case. I was quoted $118 for the sensor and that's with about a $15 "discount". The price of the sensor doesn't bother me, the $5XX to install it kinda irritated me considering it's not that difficult to do.
Aaron
Aaron
#23
$500 to install a CPS? No way. Dealer charged me $130 after tax. 1 hour labor.
#24
Thread Starter
MBWorld Fanatic!
Joined: Jul 2010
Posts: 1,477
Likes: 1
From: Colorado
07' SL65, 04' E55, 03' Evo8, 08' GSXR, DSM's...
I'd like to go to your dealer then cause i was quoted pretty close to the same price from two different Mercedes dealers in two totally different areas. Oh well.
Aaron
Aaron
#25
They must have wanted to take the intake manifold off to get to the part. I had an indy shop quote me $5** and some dollars to do it and that's what they wanted to do.