Found some parts by dumpster, any use???
09-24-2010, 07:53 PM
#4
MBWorld Fanatic!
Thread Starter
Well.. I came up with some ideas:
(all options include a few dozen beers first)
Shoot them with a shot gun
Try to shot them with a hand gun
Tie to bumber of neighbors car and laugh when he drives off
Melt into Nascar Belt Buckle (Tony Stewart)
Christmas Ornaments
Shoot them with a shot gun (oh, said that already.. but my favorite)
Make a BMX jump out of them
Flower Pot..
or.. Ill take suggestions.
(all options include a few dozen beers first)
Shoot them with a shot gun
Try to shot them with a hand gun
Tie to bumber of neighbors car and laugh when he drives off
Melt into Nascar Belt Buckle (Tony Stewart)
Christmas Ornaments
Shoot them with a shot gun (oh, said that already.. but my favorite)
Make a BMX jump out of them
Flower Pot..
or.. Ill take suggestions.
09-24-2010, 07:57 PM
#6
MBWorld Fanatic!
Thread Starter
I CANNOT believe I didnt think of that. I just picked up a large quantity of JB Weld and Super glue.. I mean.. WhoHa is the first thing that should have come to mind!!! 
09-24-2010, 08:20 PM
#7
MBWorld Fanatic!
Trending Topics
09-24-2010, 09:39 PM
#10
MBWorld Fanatic!
Thread Starter
When you are a mod-aholic.. the couch is simply a "Parts Staging Area"...
How do I make the Y-Pipe fit? That is my only question at this point. I bought the part listed on one of the threads...
113 090 01 29
Even with the rubber gasket pulled out, the 82mm TB is about 1mm bigger than will fit. I think I could trim the inside of the plastic, but it will be tight.
...
How do I make the Y-Pipe fit? That is my only question at this point. I bought the part listed on one of the threads...
113 090 01 29
Even with the rubber gasket pulled out, the 82mm TB is about 1mm bigger than will fit. I think I could trim the inside of the plastic, but it will be tight.
...
Last edited by Bramage; 09-24-2010 at 09:43 PM.
09-24-2010, 11:43 PM
#16
09-24-2010, 11:52 PM
#17
MBWorld Fanatic!
Thread Starter
09-25-2010, 10:16 AM
#21
Former Vendor of MBWorld
Join Date: Oct 2008
Location: Long Island, NY
Posts: 1,181
Likes: 0
Received 4 Likes
on
4 Posts
Whatever we're tuning!
When you are a mod-aholic.. the couch is simply a "Parts Staging Area"...
How do I make the Y-Pipe fit? That is my only question at this point. I bought the part listed on one of the threads...
113 090 01 29
Even with the rubber gasket pulled out, the 82mm TB is about 1mm bigger than will fit. I think I could trim the inside of the plastic, but it will be tight.
...
How do I make the Y-Pipe fit? That is my only question at this point. I bought the part listed on one of the threads...
113 090 01 29
Even with the rubber gasket pulled out, the 82mm TB is about 1mm bigger than will fit. I think I could trim the inside of the plastic, but it will be tight.
...
09-25-2010, 10:46 AM
#23
MBWorld Fanatic!
Thread Starter
09-26-2010, 02:39 PM
#25
MBWorld Fanatic!
Thread Starter
Someone asked about Part #'s...
If I tell you, everyone will try to do this, and it is a very well kept secret..
however, I suggest you look at the kit TTM is working on. (Talk to Bruce)
http://www.ttmotorsports.com/services.htm
They take all the hard part out... They machine the plenum for stock (like) fit, modify mounting holes, and Y-Pipe.. It is the way to go, and what I would have done had the parts not shown up by my dumpter..
Here you go, keep it quiet!!
82mm TB (MB)
A273-141-03-25
80mm Plenum
A113-140-09-12
Gaskets
A273-141-06-80 (Throttle Body)
A113-141-07-80 (Plenum to SC)
A113-098-00-80 (Right Intake)
A113-098-01-80 (Left Intake)
Y-Pipe Kit
A113 090 01 29
**thanks to other members who actually pulled all of this together long before me
If I tell you, everyone will try to do this, and it is a very well kept secret..
however, I suggest you look at the kit TTM is working on. (Talk to Bruce)
http://www.ttmotorsports.com/services.htm
They take all the hard part out... They machine the plenum for stock (like) fit, modify mounting holes, and Y-Pipe.. It is the way to go, and what I would have done had the parts not shown up by my dumpter..
Here you go, keep it quiet!!
82mm TB (MB)
A273-141-03-25
80mm Plenum
A113-140-09-12
Gaskets
A273-141-06-80 (Throttle Body)
A113-141-07-80 (Plenum to SC)
A113-098-00-80 (Right Intake)
A113-098-01-80 (Left Intake)
Y-Pipe Kit
A113 090 01 29
**thanks to other members who actually pulled all of this together long before me
