Cant get into dyno mode menu
#1
Cant get into dyno mode menu
Hello!
I have searched thruu all threads according dyno mode and i have tryed all , i mean ALL!!! posibilities to get into dyno mode and none of them work for me; My car is E55 2003. Can someone confirm that 2003 E55 CAN get into dyno mode and what is exact procedure?
Also i am interested if anyone knows if you unplug 1 coil at idle running engine, does it emidiatly trigerr CEL light in the instrument cluster? Because my car does not.
Thanks a lot guys!!
Snogard
I have searched thruu all threads according dyno mode and i have tryed all , i mean ALL!!! posibilities to get into dyno mode and none of them work for me; My car is E55 2003. Can someone confirm that 2003 E55 CAN get into dyno mode and what is exact procedure?
Also i am interested if anyone knows if you unplug 1 coil at idle running engine, does it emidiatly trigerr CEL light in the instrument cluster? Because my car does not.
Thanks a lot guys!!
Snogard
#2
MBWorld Fanatic!
1. before you turn your car off or before you start the procedure, make sure the digital speedo is shown in your instrument cluster while key is in on position, not just during vehicle entry.
2. turn key to accessory 1 position.
3. push the trip reset button quickly 3 times.
4. push the arrow up button twice to "dynomometer test screen".
5. push the plus button once to "on"
6. turn on ignition.
that's all. make sure to turn dynomode off before doing any driving!
2. turn key to accessory 1 position.
3. push the trip reset button quickly 3 times.
4. push the arrow up button twice to "dynomometer test screen".
5. push the plus button once to "on"
6. turn on ignition.
that's all. make sure to turn dynomode off before doing any driving!
#3
1. before you turn your car off or before you start the procedure, make sure the digital speedo is shown in your instrument cluster while key is in on position, not just during vehicle entry.
2. turn key to accessory 1 position.
3. push the trip reset button quickly 3 times.
4. push the arrow up button twice to "dynomometer test screen".
5. push the plus button once to "on"
6. turn on ignition.
that's all. make sure to turn dynomode off before doing any driving!
2. turn key to accessory 1 position.
3. push the trip reset button quickly 3 times.
4. push the arrow up button twice to "dynomometer test screen".
5. push the plus button once to "on"
6. turn on ignition.
that's all. make sure to turn dynomode off before doing any driving!
Thanks man! I will try it today and report tomorrow....