How do i remove this?
#3
Member
Join Date: Mar 2007
Location: PHX & Huntsville
Posts: 214
Likes: 0
Received 1 Like
on
1 Post
2010 Silverado, 03 H2, 66 Nova SS, 03 E55
Cakewalk.
I took mine out and it took all of 10 minutes.
You're gonna need a couple torx drivers--really small.
Just remove all the obvious little screws. Pay attention to which ones went where as there are two different sizes.
Unclip the wiring connectors and push the remaining 4 inches of cable back into the console. No codes will pop or anything like that.
I love this little cubby now, it's perfext for a pair of shades.
I took mine out and it took all of 10 minutes.
You're gonna need a couple torx drivers--really small.
Just remove all the obvious little screws. Pay attention to which ones went where as there are two different sizes.
Unclip the wiring connectors and push the remaining 4 inches of cable back into the console. No codes will pop or anything like that.
I love this little cubby now, it's perfext for a pair of shades.
#6
Member
Thread Starter
Join Date: Feb 2011
Location: Perth, Australia
Posts: 217
Likes: 0
Received 1 Like
on
1 Post
E55 AMG
Can someone please tell me my options regarding if i need this to run a bluetooth setup and what setup will work with this.
Also i have an AUX button on my screen. Where is the AUX located?
Also i have an AUX button on my screen. Where is the AUX located?
#7
Member
You will need that to run MB Bluetooth in the car. They have a retro fitted adapter that will plug in there for Bluetooth capability. It is available from the dealer or you could always try eBay.
Trending Topics
#8
Senior Member
#12
MBWorld Fanatic!
so does incartronics (VERY Spendy with them and spotty customer service)
#16