Voodoo Trucker

I forgot to mention that the gaskets I bought from them were not listed as being for the W211 but for the other two models. I asked my MB parts guy to cross them and they are the same mirrors used.

Grree

I just disassembled mine. No parts number from any side on the gaskets. I think it's not a separate part because cable going thru small hole in it and to remove/replace the gaskets need to either cut connectors on a cables or make the hole wider where the cable come through and this could lead to water leak in

tmond

So does the w203 seal fit the w211?

JoeNobody

The replacement motor has a 203 prefix on it, which suggests the motors and seals are the same.

I tried ordering an item from parts.com from that might have been a seal (part 2118110298), but they emailed me and said the part number was not valid (even though the part is listed in their Mercedes part catalog).

Given the wire that goes through the seal has a plug that's larger than the hole in the seal, I believe the only official way to repair the gasket/seal is to replace the entire motor assembly

turbo97se

I think I have some spare aftermarket ones that are on my aftermarket broken ones. They were used for only 4-5 months before painter/detailer broke the motors (not knowing that they were electric) PM me if people still need the gaskets.

WHTEVO

I am looking for a set of gaskets.

Denroll

Every time this thread is bumped, I get my hopes up in thinking that someone has found a solution.

I might make a trip to the hardware store and see what I can find.

MB984

Check this site out. I have emailed them but no response yet.

http://www.hongmei.com.tw/?202,w211-...ror-rubber-pad

Bigtickets

My driver side mirror was hit the other week and now the oil has leaked out of the thing. Does anybody know where to get a replacement or even better...the upgrade to the retractable mirrors?

Bigtickets

Sorry off topic

MBgasket

Euro Power Folding Mirror Gaskets anybody?

http://www.ebay.com/itm/181312066019...84.m1555.l2649

MBgasket

W211 Euro Power Folding Mirror Gaskets anyone?

http://www.ebay.com/itm/181312066019...84.m1555.l2649

vietjdmboi

thanks for the link. just bought me a pair.

WHTEVO

Hmm, says bidding has ended. I sent him a message about getting some ordered although i think the individual who posted the link is the seller based off his username.

MBgasket

We're back up guys. I only have about 8 pairs of these power folding mirror gaskets available. The US-spec, non-power-folding gaskets are still in prototype stage. Thanks for your patience all!

3BNick

Why am I subscribed to this thread yet I have no posts? MBgasket, were you operating under a different screen name and banned for non supporting vendor advertising and subsequent posts deleted? If so, that is crap. I feel a ban/suspension coming my way...

I still want those gaskets. expect paypal soon.

WHTEVO

I got a set coming. Will update as i do the install.

vietjdmboi

Just installed the gaskets. fits perfectly.

WHTEVO

That's great news! I may buy another set just to keep since it took so long to come by these. I am still waiting for mine to ship out. You have the normal US spec mirrors correct? Did you just cut holes for the plugs or anything special?

vietjdmboi

I have the us spec mirror. The only thing I did was punch a hole in the gasket and shove the wires through. I did not use the hole in the original location but rather the nub that's on the new gaskets.

Bramage

Just ordered a set $91 / ebay fingers crossed. I was going to try to find a co to do the injection molding.. someone beat be to it. Good on them. Some money to made here and also a fix we ALL need. PS Denroll stole my sandwich

WANTED!!

Sweet!!! I may also be ordering some soon then.

MBgasket

*UPDATE* ..since we're having issues with tooling, we can offer the "Euro" gaskets at $70/pair, shipped. The only installation inconvenience these gaskets pose is filling the old wires hole with a silicone sealant and cutting/punching a small hole in the new gaskets, then sealing that hole. Fit and finish however, is excellent. See above feedback to verify this.

Please send me your paypal email address if you want a pair of these. I will have my next shipment within two weeks and then will invoice those who want them.

I have this list from a while back. Thanks everyone.


1. GunMoto
2. 3Bnick
3. 803quicksilver
4. kompression
5. t-bone
6. gazan1204
7. Denroll ?
8. yikes ?
9. WANTED!!
10. WHTEVO (another pair?)

WHTEVO

For anyone else who is not sure about these, i already installed my pair and they fit perfect.

MBgasket, i will think about it if i want to order another set to just have. Will let you know soon. I do wiish i didn't just pay ~100 for the set i just got though :P

Bramage

I installed mine too Perfect, and about ****ing time.. I too wish I didn't pay the higher price, but who cares, I have money coming out of my ***.

The Euro ones are fine. The connectors wont fit through the hole anyway, so you're gonna cut a hole. Unless you want to heat and stretch.

I'm assuming its a tight fit, which reminds me of when I met Denroll for the first time. That problem is long gone as I am sure others can attest to.