Keyless Go not working after Service Reset??
08-01-2011, 11:10 PM
#1
MBWorld Fanatic!
Thread Starter
Keyless Go not working after Service Reset??
Hey guys I reset my service message today via the service menu on the odometer.(Key to position 1, press reset 3 times etc...). I was successful in clearing the message .. But my Keyless quit working immediately after that. When I run a check in DAS, it tells me that none of the keyless modules are responding! Is there a way to reactivate? What the heck did I screw up? I tried recoding back to USA from ROW and turning on the Keyless Go reminder warning etc ... but no joy! 
*EDIT* Update - Well after clearing the error codes in DAS my Keyless start works but the doors still do not respond!
*EDIT* Update - Well after clearing the error codes in DAS my Keyless start works but the doors still do not respond!
Last edited by turbo97se; 08-02-2011 at 01:12 AM.
08-02-2011, 02:40 AM
#3
MBWorld Fanatic!
Thread Starter
Yup ... do I need to reactivate do you think? Maybe I'll just try for kicks ... nothing else to lose!
EDIT VERY strange .. went out there to try .. everything working again! So weird!!!! Do you know where in the DAS to reset service light? I don't want to go through this again!! Thanks!
All I know is, after resetting the Service light from the console without DAS, my Keyless quit working all together! I had to delete the error codes after running a diagnostic and Keyless start came back but not the doors. Now the doors are back!!!!
EDIT VERY strange .. went out there to try .. everything working again! So weird!!!! Do you know where in the DAS to reset service light? I don't want to go through this again!! Thanks!
All I know is, after resetting the Service light from the console without DAS, my Keyless quit working all together! I had to delete the error codes after running a diagnostic and Keyless start came back but not the doors. Now the doors are back!!!!
Last edited by turbo97se; 08-02-2011 at 02:46 AM.
